19
3.2 Hard-Disk Drive Installation
The DVR is equipped with two compartments of hard-disk drive. The unit usually comes with one
hard-disk drive installed in the compartment HD1, which is default-configured as a master. If you need
a second hard-disk drive to be installed in the compartment HD2 (Mobile), please contact your
distributors or installers for specific instructions on how to install it. Please don’t serve yourself before
consulting your installers. If there is only one hard-disk drive in the mobile compartment, please set the
HD2 USAGE
option to
REC
(Please refer to section 5.5) before proceed recording function. The
jumper-settings arrangement of installed hard-disk drives for the system (Table 3.2 A.) is shown in the
tables below.
Table 3.2 A. The jumper settings of hard-disk drives in the system
Location
Jumper
IDE 1
Compartment HD 1
Master (Default)
IDE 2
Compartment HD 2
Master
Table 3.2 B. Compatible hard-disk drives
Manufacturer Model
Capacity
Rotation
ST380020A/P 80GB 5400
RPM
Seagate
ST340810A/P 40GB 5400
RPM
4A160J0-1A 160GB
5400
RPM
4R080L0-1 80GB
5400
RPM
Maxtor
6Y120L0-1 120GB
7200
RPM
NOTE: Hard-disk drives not shown on this list have not been tested by the engineering team
and are not recommended for use with this product. For the latest updated list on the
recommended hard-disk drives, please contact your dealers or distributors.