7
1. CS mount: connect the lens with the camera
2. Screw: lock Back focus Adjustment
3. Back focus Adjustment
4. Base: connect the camera with the tripod
5. SD card slot: insert a SD card into this slot for recording and storage
6. Video: not supported (for factory use only)
7. RJ45 Ethernet Connector/ PoE: insert the RJ45 cable for network
connection. It also supports PoE (Power over Ethernet).
8. Default Button: reset all of the camera parameters to factory default by
pressing for 5 seconds.
9. Reset Button: restart the system.
10. Power Indicator: Red light indicates power connection.
11. I/O Connector: Input / Output Connector
12. Power Terminal
Note
Connectors and field wiring terminals for external Class 2
circuits provided with marking indicating minimum Class of
wiring to be used. Class 2 shall be marked adjacent to the
field wiring terminals
A/I Audio
in
GND
A/O Audio
out
GND
AO Alarm
out
COM
AI Alarm
in
GND
4
