12
Connecting the Camera to a Personal Computer
Setting IP
This is a network-based camera and must be assigned an IP address first.
The camera’s default IP address is 192.168.0.2 and sub mask is
255.255.255.0. To change IP address, open Network Settings page described
later.
If your network uses a DHCP server, an IP address can be assigned
automatically from the DHCP server by enabling DHCP in the Network
Settings page described later.
Connecting the Camera to a Personal Computer
1. Connect the network cable to the camera and then turn on the camera’s
power.
2. Set the personal computer’s IP address. The camera’s default IP address
is 192.168.0.2 and sub mask is 255.255.255.0.
3. Check that the camera and computer are connected by pinging the IP
address you have set. To do this, start a command prompt (Windows:
from the Start Menu, select Program. Then select Accessories and choose
Command Prompt.) Type “Ping 192.168.0.2”. If the message “Reply
from…” appears, it means the connection is done.
4. Start Internet Explorer and enter IP address:
192.168.0.2
). A login window
will appear. Enter the default user name:
admin
and password:
jvc
to log
in.
Figure 3-1 Log on Screen
5. Images of the camera can be viewed through Internet Explorer. Before
viewing, follow these steps to enable the display.
a. Enable Cookies as shown below:
In Internet Explorer, click
Internet Options
on the
Tools
menu.
On
the
Privacy
tab, move the settings slider to
Low
or
Accept All
Cookies
.
Click
OK
.
