8
3 Installation and Connections
This chapter describes the installation and connection of the Box Camera.
Before You Begin
Please read this INSTRUCTIONS carefully before you install and operate the
camera.
Unpack Everything
HD IP Camera
WARRANTY CARD
SAFETY PRECAUTIONS
QUICK GUIDE
8-PIN TERMINAL BLOCK
for alarm input/output
CD-ROM
containing INSTRUCTIONS and IP
Finder software
Equipment Required
The following tools might help you to complete the installation:
Drill
Screwdrivers
Wire
cutters
Operating Precautions
Do not install the camera in following places.
In a place exposed to rain or moisture.
In a place with vapor or oil, for example in a kitchen.
When the ambient temperature rises above or falls below the acceptable range (from -10°C to
50 °C.
In a place at which corrosive gases are emitted.
Near a source of radiation, X-rays, strong radio waves or magnetism.
In a place subject to vibration.
In a place with excessive dirt.
Maintenance
Wipe the camera with a dry, soft cloth to
remove any dirt. Do not use benzene or thinner to wipe the
camera. Doing so may melt the surface or cause it to fog. For tough stains, wipe with a neutral
detergent diluted with water, followed by wiping with a dry cloth.
