JVC VN-H237VPU, Instructions Manual, Page: 40 / 114

40
Internet Explorer Setting
Storage Page (continued)
* The [Set values] in bold letters are factory defaults.
Settings (continued)
G
Constant (continued)
Sunday to Saturday Sets the start and end time of recording for each day of week.
[Set values: Unmask All , Mask All, Unmask Span, Mask Span ]
If you have selected
A
Specify the time period for invoking the action
B
or
A
Specify to stop the action
B
, you must set the time period.
[Set values: 00H00M-24H00M]
H
Alarm Sets alarm recording.
Encoder Sets an encoder for alarm recording and a JPEG frame rate.
[Set values: 1 to 5 to 30 fps ]
Memo:
●
You can select an Encoder No. for JPEG.
●
The frame rates that can be set vary depending on the
encoding settings.
Trigger1, Interval,
Trigger2 Condition 1: Sets a condition to record an alarm.
[Set values: Position, Motion detection, Day/Night,
Tampering Detection, Time ]
Interval : Unavailable.
Condition 2: Unavailable.
Position Number Position Number is displayed if Trigger1 is set to
A
Position
B
.
This function executes an action if the trigger is moved to the
position entered.
[Set values: 0 to 19]
Day/Night (VN-H37U and
VN-H237VPU only) Day/Night is displayed if Trigger1 is set to
A
Day/Night
B
.
Color : Executes an action when the image changes from Black
and White to color.
Black and White: Executes an action when the image changes
from color to Black and White.
[Set values: Color , Black and White ]
Memo:
●
This function is valid only for models with Day and Night.
Time Time is displayed if Trigger1 is set to
A
Time
B
.
This function executes an action at the time you have entered.
[Set values: 00H00M-24H00M]
Pre-Trigger Sets a trigger time before FTP recording (a recording time before
alarm input) in seconds.
[Set values: 0 to 5 to 60 sec ]
Post-Trigger Sets a trigger time after FTP recording (a recording time after
alarm input) in seconds.
[Set values: 0 to 5 to 60 sec ]