JVC VN-H237VPU, Instructions Manual

Page: 19 / 114

19
* The [Set values] in bold letters are factory defaults.
C
Brightness Adjusts the brightness of an image.
Increasing the value brightens dark areas, and decreasing the value makes
bright areas more pleasing to the eye.
[Set values:
ⴑ
5 to Normal to 5 ]
D
Color Level Adjusts the color level.
A larger value increases the darkness of color, but a smaller value
decreases the darkness of color.
[Set values:
ⴑ
5 to Normal to 5 ]
E
Black Level Adjusts the black level. Setting the value to "Low" darkens the video image.
[Set values: Low, Normal]
Memo:
●
If the black level is set to
A
Low
B
, this may be too low depending on the
monitoring device, or dark area will become complete black.
●
When using the Monitor Output or H.264 images, set it to "Normal".
F
Gamma To alter the appearance of dark areas in a video image, adjust the gamma
curve.
OFF : Do not perform gamma correction. The entire image appears
dull.
ON : Perform gamma correction.
[Set values: ON , OFF ]
G
Enhance Level Sets the intensity of edge enhancement.
A larger value increases the intensity of edge enhancement, but a smaller
value decreases the intensity of edge enhancement.
[Set values:
ⴑ
5 to Normal to 8 ]