18
English
4 Select the music source.
1. Press the TIMER button on the Unit.
“TUNER” flashes on the display.
2. Press the
¢
or
4
button to select the music source you
want to listen to.
The display changes as shown below.
5 Set the volume level.
1. Press the TIMER button on the Unit.
The current volume setting flashes on the display.
2. Press the
¢
or
4
button to select the volume level.
--
: The current volume level will be used.
0 to 40 : When the timer is turned on, the volume will be
automatically set to the selected level.
6 Press the TIMER button on the Unit.
The timer setting is completed and the display returns to the
indications before you set the timer. The Timer indicator
remains lit.
7 Before turning off the System, prepare
the music source selected in step 4.
TUNER: Tune in to the desired station.
REC
TUNER: See “Setting the Recording Timer.”
CD: Insert a CD.
TAPE: Insert a tape.
8 Press the
button to turn off the
System.
To cancel the timer,
press the TIMER button for more than 2
seconds. The Timer indicator goes out on the display.
To re-activate the canceled timer,
press the TIMER button for
more than 2 seconds to light the Timer indicator. Then, press the
TIMER button until the display returns to the previous indications.
The Timer indicator should remain lit.
To confirm the timer settings,
cancel the timer once by
pressing the TIMER button, and press the button again for more
than 2 seconds. Then, press the TIMER button repeatedly, to see
the current timer settings (ON time, OFF time, source, and
volume). Press the TIMER button to set the timer again.
To change the timer setting,
repeat the setting procedure from
the beginning.
•
When the timer turns on, the Timer indicator starts flashing.
Note:
If the Unit is turned on when the timer-on time comes,
Daily Timer does not work.
CAUTION:
If the System is unplugged, or a power failure
occurs, the timer will be canceled. You will need
to reset the clock first, then the timer.
SLEEP
Setting the Recording Timer
With the Recording Timer, you can make a tape of radio broadcast
automatically.
How Recording Timer actually works
The Unit automatically turns on, tunes into the last received station,
and starts recording when the on-time comes. Then, when the off-
time comes, the Unit automatically turns off (stands by).
The timer setting remains in memory until you change it.
Notes:
•
Finish each step within 30 seconds. Otherwise, the setting is
cleared and the procedure must be repeated from the beginning.
•
The clock must be correctly set for the timers to work.
If the clock has not been set, the CLOCK indicator will flash
on the display when you press the TIMER button for more than
2 seconds, and then the display alternates between “ADJUST”
and “CLOCK” for about 5 seconds.
1 Press the
button to turn on the
System.
2 Tune in to the desired station.
See page 8.
3 Press the TIMER button on the Unit for
more than 2 seconds.
The ON indicator lights up, and then the current ON time
flashes on the display. (Example: 12:00)
4 Set the ON time. (Example: 12:15)
Press the
¢
or
4
button on the Unit to set the hour you
want the Unit to come on.
Pressing the
¢
button moves the hour forwards and pressing
the
4
button moves it backwards. Hold down the button to
move the hour rapidly. Press the TIMER button to adjust the
minute.
5 Set the OFF time. (Example: 13:15)
1. Press the TIMER button on the Unit.
The hour digits of the current OFF time flashes, and then
the OFF indicator lights up on the display.
2. Press the
¢
or
4
button on the Unit to set the time you
want the Unit to be turned off.
Pressing the
¢
button moves the hour forwards and
pressing the
4
button moves it backwards. Hold down
the button to move the hour rapidly. Press the TIMER
button again to adjust the minute.
6 Press the TIMER button on the Unit.
ON
SLEEP
ON
SLEEP
OFF
SLEEP
OFF
SLEEP
EN10-22.UX-V10[U]
00.4.19, 10:48 AM
18
