JVC UX-V10, Instructions Manual

Page: 12 / 49

8
English
Using the Tuner
FM mode indicators
Tuning In a Station
1 Press the FM/AM button.
The band and frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the
preset number appears first.)
Each time you press the button, the band alternates between
FM and AM.
2 Select a station using one of the
following methods.
■
Manual Tuning
Press the
4
or
¢
button repeatedly to move from
frequency to frequency until you find the station you want.
OR
■
Auto Tuning
If you press and hold the
4
or
¢
button for one second or
more, the frequency changes down, or up, automatically until a
station is found.
OR
■
Preset Tuning using the Remote Control (Possible
only after presetting stations)
Select the desired preset number using the UP, DOWN, > or <
button on the Remote Control. After 1 second the display will
show the preset number’s band and frequency.
Example: Press the UP button until the preset number 12
“P-12” appears.
When the System is in use, the display shows other items as well.
For simplicity, only the items described in this section are shown here.
Band display, Frequency
display, Preset channel
FM/AM
¢
4
You can listen to FM and AM stations. Stations can be tuned in
manually, automatically, or from preset memory storage.
■
Before listening to the radio:
•
Make sure that both the FM and AM antennas are correctly
connected. (See page 3.)
Setting the AM tuner interval
spacing –––––––––––––––––––––––––––––––
When shipped, the AM tuner interval is set to 9 kHz or 10 kHz
spacing (Initial setting: U/UB/US/UT/UX...9 kHz, UY...10 kHz).
You can change it to 10 kHz or 9 kHz spacing.
To select 10 kHz intervals,
while holding down the
¢
button
on the Unit in Standby mode, press the button on the Unit to
turn on the power (at the same time, the 100 kHz spacing is
selected for FM broadcast).
To select 9 kHz intervals again,
while holding down the
4
button on the Unit in Standby mode, press the button on the
Unit to turn on the power.
Note:
When you change the setting, the preset stations are erased.
You will need to preset the stations again. (See page 9.)
One touch radio ––––––––––––––––––––––
Just press the FM/AM button to turn on the System and start
playing the station you were last tuned to.
■
You can switch from any other sound source to the radio by
pressing the FM/AM button.
MONO STEREO
FM/AM
AM FM
[10 kHz Intervals] [9 kHz Intervals]
DOWN UP
+
+
UB... Hong Kong UX... Saudi Arabia
US... Singapore UY... Argentina
UT... Taiwan ROC U... Others
AM FM
FM/AM
(On the Unit) (On the Remote Control)
DOWN UP
(After 1 second)
or
DOWN UP MULTI CONTROL
TAPE FM/AM CD
STANDBY
PHONES
AUX
REC
REV
MODE
AHB
PRO
TIMER
CLOCK
VOLUME
CD
OPEN/CLOSE
AUTO PRESET
FM/AM
FM MODE
¢ 4
DOWN
REMOTE CONTROL RM-SUXV10E
CANCEL TREBLE
FM/AM
FM
MODE
DISPLAY SLEEP
AUX
TAPE CD
CD
BASS
AHB
PRO
DOWN RANDOM
UP
AUTO
PRESET
REPEAT
SET PROGRAM
VOLUME
UP
<
>
SET
EN01-09.UX-V10[U] 00.4.19, 10:45 AM 8