JVC UX-S77 Page 37 Service Manual Download | Manualshive

Page: 37 / 83

background image

(No.MB230)1-37

4.7

Confirming method of DVD region

(1) Press "STANDBY/ON" key of the main body to turn it on.
(2) Push both "B.SKIP" key and "DVD/CD" key of the main body.

NOTE:

Confirming DVD region is effective only when source is DVD mode.

(3) DVD region confirm mode set up, and DVD region is displayed temporarily on FL display for 5 seconds.

NOTE:

If there is no information feedback, SYS-CON will display "WAIT" blinking 0.5 second ON & OFF.

(4) FL display will display "AREAxxRy" where "AREAxx" is the destination information & R is the region information.
(5) After 5 seconds, return to previous display.

4.8

Displaying of micon version

(1) Press "STANDBY/ON" key of the main body to turn it on.
(2) Push "STANDBY/ON" key, "ENTER" key and "9" key of the remote controller.

NOTE:

Displaying of micon version is effective only when source is DVD mode.

(3) Micon version is displayed temporarily on FL display for 5 seconds.

NOTE:

If there is no information feedback, SYS-CON will display "WAIT" blinking 0.5 second ON & OFF.

(4) Each "STANDBY/ON" key, "ENTER" key and "9" key of the remote controller press, change the display as follows.
(5) After 5 seconds, return to previous display.

4.9

Display of tuner version

(1) Press "STANDBY/ON" key of the main body to turn it on.
(2) Push "STANDBY/ON" key, "ENTER" key and "1" key of the remote controller.
(3) Tuner version is displayed temporarily on FL display for 5 seconds.
(4) After 5 seconds, return to previous display.

------------ Syscon version

FL Display (Example)

C 2 3 0 8 - R 0

------------ DVD LSI (BE) version

W A I T

------------ DVD Mecha version

3 5

0 2 5 8

0 V

J C

------------ For JC

1 V

E _ R D S ------------ For E RDS

2 V

A

------------ For A

3 V

U S 9 K

------------ For US9K

4 V

U S 1 0 K ------------ For US10K

6 V

U X 1 0 K ------------ For UX10K

7 V

U W 9 K

------------ For UW9K

8 V

U W 1 0 K ------------ For UW10K

9 V

U F 9 K

------------ For UF9K

A V

U F 1 0 K ------------ For UF10K

5 V

U X 9 K

------------ For UX9K

«
...
35
36
37
38
39
...
»

Summary of Contents for UX-S77




















































































Reviews:

No comments

Related manuals for UX-S77

Brand: JBL Pages: 7

Brand: M-LOCKS Pages: 3

Brand: K-array Pages: 8

Brand: K-array Pages: 20

Brand: Samson Pages: 20

Brand: Samsung Wisenet Pages: 16

Brand: Neptune Pages: 35

Brand: Peavey Pages: 4

TIG200PACDC PFC

Brand: Jasic Pages: 52

Brand: Steren Pages: 12

FORMULA FH56-BAR

Brand: BIC Pages: 2

Brand: Roksan Audio Pages: 11

Brand: Ideal Security Pages: 4

Vingtor Stentofon SPA-AC6

Brand: Zenitel Pages: 54

Brand: Takstar Pages: 2

Brand: Xenon Pages: 6

Brand: Vectaire Pages: 6

Brand: iWeld Pages: 76

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands