JVC UX-S77 Page 12 Service Manual Download

Page: 12 / 83

1-12 (No.MB230)

3.1.8 Removing the main board (See Fig.17)

• Prior to performing the following procedures, remove the side

panels L/R, top cover assembly and rear cover.

Reference:

Remove the tuner as required. (See 3.1.6 "Removing the tuner")
(1) From the right side of the main body, remove the two

screws

attaching the main board.

(2) Remove the main board to the direction of this side and dis-

connect the connectors

CN761

and

CN762

on the main

board.

(3) From the forward side of the main board, disconnect the

card wires from the connectors

CN700

CN763

and

CN764

on the main board.

(4) Disconnect the wire from the connector

CN767

on the for-

ward side of the main board.

Fig.17

3.1.9 Removing the power supply board (See Fig.18)

• Prior to performing the following procedures, remove the side

panels L/R, top cover assembly and rear cover.

Reference:

Remove the tuner as required. (See 3.1.6 "Removing the tuner")
(1) From the left side of the main body, remove the two screws

attaching the power supply board.

(2) Cut off the tie band bundling the power cord.
(3) Remove the power supply board toward this side and dis-

connect the connector

CN902

on the power supply board.

(4) From the forward side of the power supply board, discon-

nect the power cord and wires from the connectors

CN901

CN904

CN905

and

CN907

on the power supply board.

Reference:

• When connecting the wires to the connectors

CN904

and

CN905

on the power supply board, bundling the wires with

the wire clamps as before.

• After connecting the power cord to the connector

CN901

the power supply board, bundle the power cord with the new
tie band as before.

Fig.18

Card wire

Main board

Card wire

CN761

CN764

CN762

CN763

Card wire

CN767

CN700

Power supply board

Tie band

Power cord

CN902

CN907

CN904

CN905

CN904

Wire clamps

Wires

CN902

Summary of Contents for UX-S77




















































































Search results

Summary of Contents for UX-S77

Reviews:

Related manuals for UX-S77

Brands by name

Popular brands

JVC UX-S77, Service Manual

Search results

Summary of Contents for UX-S77

Reviews:

Related manuals for UX-S77

Brands by name

Popular brands