(No.MB215)1-19
SECTION 4
ADJUSTMENT
4.1
Measurement instruments required for adjustment
(1) Low frequency oscillator
This oscillator should have a capacity to output 0dBs to
600
Ω
at an oscillation frequency of 50Hz-20kHz.
(2) Attenuator impedance : 600
Ω
(3) Electronic voltmeter
(4) Distortion meter
(5) Frequency counter
(6) Wow & flutter meter
(7) Test tape
VT703L : Head azimuth
VT712 : Tape speed and running unevenness (3kHz)
VT724 : Reference level (1kHz)
(8) Blank tape
TYPE : AC-225
TYPE : AC-514
(9) Torque gauge : For play and back tension
FWD(TW2111A), REV(TW2121a) and
FF/REW(TW2231A)
(10) Test disc : CTS-1000
4.2
Measurement conditons
4.3
Radio Input signal
Power supply voltage
: AC230V ~ AC240V 50Hz / 60Hz
Reference output
: Speaker : 0 dB (2V)/4
Ω
: Headphone : - 10 dB(0.245V)/32
Ω
Reference frequency and
input level
: 1kHz, AUX : -8dBs
Measurement output
terminal
: at Speaker
*Load resistance
: 4
Ω
AM frequency
: 1 kHz
AM modulation
: 30%
FM frequency
: 1 kHz
FM frequency deviation
: 22.5kHz
www.freeservicemanuals.info
13/10/2016
Published in Heiloo Holland