E-4
Introduction
Safety Precautions
• Installation of this unit requires expertise.
Please contact your dealer for details.
• The ceiling to mount the camera has to
be strong enough to support the weight
of this product.
If the ceiling is not strong enough, make
sure to apply reinforcement to the ceiling
before installation.
• Be sure to tighten the screws or nuts
securely, Insufficient tightening may cause
the unit to fall from its mount.
• The unit is to be powered by a DC 12 V or
an AC 24 V power supply.
The AC 24 V power supply should
conform to the following:
Class 2 only (U type)
Isolated power supply only (E type)
• The rating label is displayed on the bottom
of the unit.
• JVC will not be liable for any damage
resulting from the camera dropping due
to incomplete installation by not following
the installation instructions. Take caution
when performing installation.
• Before starting an important recording, be
sure to perform a test recording in order
to confirm that a normal recording is
possible.
• We do not accept liability for the loss of a
recording in the case of it becoming
impossible to record due to a problem in
the video camera, VCR or video tape.
• We do not accept liability for any damage
to the camera in cases when it is dropped
because of incomplete installation due to
not observing the installation instructions
correctly. Please be careful when
installing the camera.
03_e_TK-C205VPU_02_20_e.p65
05.4.22, 9:37 AM
4
