E-8
1
Safety cable installation screw
Install the safety cable using this screw.
(Safety cable not included.)
2
Mounting holes (for mounting to the
electrical box)
When using a 4 inch square electrical
box, the 2 holes are used to fix the box
in place.
3
Mounting holes (for mounting to the
ceiling)
These holes are used to mount the
camera body to the ceiling.
4
Conduit hole
Hole for installation to conduit hole pipe
and wiring.
5
Conduit plug & hole (side)
When the unit cannot be installed to the
ceiling, the pipe is mounted to this hole
for wiring.
6
Tamper-resistant screws
Tamper-resistant screws for fixing the
dome cover to the base.
Use the provided wrench to install/
remove the Tamper-resistant screws.
Names and Operations of Parts
Main unit bottom/side/top
side
bottom
top
CAUTION
Use screw size suitable for the mounting
holes (ø5mm (
3
/
16
")).
CAUTION
Use screw size suitable for the mounting
holes (ø5mm (
3
/
16
")).
CAUTION
To avoid unforeseen accidents, attach a
safety cable. Otherwise, there is nothing
to prevent the camera from falling should
it come loose.
03_e_TK-C205VPU_02_20_e.p65
05.4.22, 9:37 AM
8
