EN
17
1
2
3
4
5
6
7
8
9
0
2
4
1
3
T
W
DV
S-VHS
ACCESS CABLE BOX
BRAND SET SCREEN
7
Press
OK.
ENTER CABLE BOX BRAND
8
Press the appropriate
NUMBER
keys to enter the
Cable Box Code from the
CABLE BOX BRAND LIST
shown below, then press
OK
.
●
If the cable box’s
channel changes to 9,
setting is complete. Press
OK
and "CABLE BOX
CONTROL IS ON" appears on the screen for about 5
seconds, then it returns to the normal screen.
●
If the cable box's channel does not change to 9, press
%fi
to move the highlight bar (arrow) to "NO", then
press
OK
. By entering another code, repeat step
8
until
the cable box’s channel changes to 9.
●
If the channel does not change after going through all
the code numbers listed for your model of cable box,
then try all the other numbers between 1 and 25.
CABLE BOX BRAND LIST
BRAND
CODE
ARCHER
1, 5, 17
CABLETENNA
1, 17
CABLEVIEW
15, 16, 17, 21, 25
CITIZEN
15, 16, 17, 21, 25
CURTIS
2, 8
DIAMOND
1, 17
EASTERN
19
GC BRAND
15, 16, 17, 21, 25
GEMINI
15
GENERAL INSTRUMENTS
1, 4, 6, 11, 12, 15
HAMLIN
10, 18, 19, 23
JASCO
15
JERROLD
1, 4, 6, 11, 12, 15
NOVAVISION
2, 8
OAK
7, 20
PANASONIC
13, 14
PULSER
15, 16, 17, 21, 25
RCA
13, 14
REGAL
10, 18, 19, 23
REGENCY
19
REMBRANDT
1, 16, 17
SAMSUNG
5, 16, 24
SCIENTIFIC ATLANTA
2, 8
SIGMA
7, 20
SL MARX
5, 16, 17, 24, 25
SPRUCER
13, 14
STARGATE
5, 15, 16, 17, 21, 24, 25
TELEVIEW
5, 16, 24
TOCOM
1, 4, 16
UNIKA
1, 17
UNIVERSAL
16, 17, 25
VIDEOWAY
3, 9, 22
ZENITH
3, 9, 22
NOTES:
●
Although the supplied Controller is compatible with many
different cable box brands, it is possible that it will not work
with your cable box.
●
If your cable box doesn’t respond to any code between 1 and
25, you can’t use the Controller to change cable box
channels. In this case, make sure to leave the cable box
turned on and tuned to the proper channel before the
scheduled start of timer recording.
Please contact your cable company about the possibility of
exchanging your current cable box with one that is compatible
with your VCR.
●
The VCR can only change the cable box channel through the
Controller during timer recording.
●
If your cable box is one that can’t be operated with a remote
control (because it has no remote sensor), you can’t use the
Controller to change its channels. Make sure to leave the
cable box turned on and tuned to the proper channel before
the scheduled start of timer recording.
●
If the VCR's memory backup expires because of a power
failure, set the cable box output channel and brand again.
●
If you are unable to set the Controller, please contact JVC toll
free at 1-800-537-5722.
When the VCR's clock has not been set (with AUTO
CLOCK set to ON), if you press
OK
in step
7
, "CABLE BOX
USERS SET CLOCK MANUALLY" will be displayed on the
screen for about 5 seconds, then the Clock Set screen will
appear; perform the manual clock setting procedure on
page 12. If you press
MENU
after the clock has been set,
the Cable Box Brand Set screen appears.
INFORMATION
NUMBER
MENU
OK
CABLE BOX BRAND SET
1
PRESS NUMBER KEY (0–9)
THEN (OK) TO TEST
PRESS (MENU) TO END
