background image

8

2  CONTROLS AND CONNECTORS

2-1  Front Panel

1

[OPERATE] button

Press to turn the operating power ON/OFF.  When this
button is ON, the OPERATE indicator lights and the unit
can be operated.  When a cassette is inserted, the
power switches on and the OPERATE indicator lights
automatically.

The OPERATE button does not completely shut off
the mains power to the unit, but switches the
operating current on and off.

2

Cassette loading slot

For cassette loading and unloading.  Use a VHS
cassette tape.

3

[REC CHECK] button

Use to check recording.
When pressed in the Record mode, this will rewind the
tape about 4 seconds and then play back the rewound
section so that the recording quality can be checked.
After playback, the Record mode is automatically re-
engaged at the point where recording was interrupted.
• The FM level is checked during playback in Recording

Check operation to determine whether or not picture
quality is defective. If it is judged defective, the heads
are automatically cleaned. How this operation is
performed is determined by the setting of the [REC
CHECK] switch in the function menu.

– When set to "MANUAL":

Head cleaning is performed once and recording
resumes.

– When set "AUTO":

Head cleaning is performed once and recording is
resumed for several seconds.  Then, Recording
Check operation is performed again.
If picture quality is again judged defective, head
cleaning is performed once again and "E-09" is shown
on the display to indicate that there is a problem.
Recording will continue, however.

PAL

REC

PLAY

FF

REW

REVERSE

PAUSE/

STILL

REC

CHECK

STOP/EJECT

COUNT/

CLOCK

TIME

MODE

TIMER

REC

AL/PL

RESET

MENU

VIDEO CASSETTE RECORDER

SHIFT/TRACKING

SET/V.LOCK

RESET

/CANCEL

OPERATE

SR-L910E

OPE. LOCK

7

9

10

11

12

13

14

15

1

2

3

4

5

6

8

16

4

[STOP/EJECT] button

• Stops the tape.
• Ejects the tape when pressed in the Stop mode.

5

[REC] button

Starts recording when pressed in the Stop mode.

6

Operation buttons
[PLAY] button

Starts playback.

[PAUSE/STILL] button

• Temporarily stops recording when pressed in the

Record mode.

• Displays a still picture when pressed in the Play mode.
• Advances field by field when pressed in the Still mode.

Pressing this button for more than 2 seconds starts
continuous field-by-field playback (slow motion).

[REVERSE] button

Starts reverse playback when pressed in the Play or Still
mode.

[FF] button

• Fast forwards the tape.
• Starts fast-forward shuttle search when pressed in the

Play mode.

• If the function menu switch <INDEX SEARCH> is set

to ON and an index-recorded tape is loaded, Index
(alarm) Search starts in the forward direction when this
button is pressed in the Stop or Play mode.
Select whether the index signal is to be recorded
during alarm signal input or every hour (exact hour
with no minute and second) using the function menu
switch <INDEX ALARM/SKIP>.

[REW] button

• Rewinds the tape.
• Starts reverse shuttle search when pressed in the Play

mode.

• If the function menu switch <INDEX SEARCH> is set

to ON and an index-recorded tape is loaded, Index
(alarm) Search starts in the reverse direction when this
button is pressed in the Stop or Play mode.
Select whether the index signal is to be recorded
during alarm signal input or every hour (exact hour
with no minute and second) using the function menu
switch <INDEX ALARM/SKIP>.

9

2-1  Front Panel

7

Display section

For details, refer to page 10.

8

[COUNT/CLOCK] button

Press this button to select the time display or tape
counter in the display.
When the power is turned off, the time is displayed.

9

[TIME MODE] button

Use to select the recording or playback time mode.
Each time this button is pressed, the recording time
mode changes in the following sequence.
3H (VHS SP mode) 

[

 L12 (12-hour Timelapse mode)

[

 L24H (24-hour Timelapse mode) 

[

 3H (VHS SP

mode) ....
Playback Time Mode will differ depending on how the
function menu switch <NOISELESS PLAY> is set.
When NOISELESS PLAY is set to OFF: 3H (VHS SP
mode) 

[

 L12 (12-hour Timelapse mode) 

[

 L24

(24-hour Timelapse mode) 

[

 3H (VHS SP mode) ....

When NOISELESS PLAY is set to ON: 3H (VHS SP
mode) 

[

 12 (12-hour Noiseless playback mode) 

[

24 (24-hour Noiseless playback mode) 

[

 3H (VHS SP

mode) ....
The selected recording/playback time mode is shown on
the display.

0

[TIMER REC] button

Press this button to execute the timer recording.  For
details, refer to "Timer Recording" on page 28.

!

[MENU] button

Press this button to display the date, time setting, timer
program setting, various function menu setting and hour
meter.  Press again to cancel the display.

@

[SHIFT/TR, -] buttons

• Press to select an item in date/time setting, timer

program setting and function menu setting.

• Press to adjust tracking and reduce noise if there are

tracking problems in the 3H (VHS SP) mode or during
search.

* Tracking adjustment is not possible in the L12H and

L24H Timelapse Play mode.

2  CONTROLS AND CONNECTORS

#

[SET/V. LOCK +, -] buttons

• Press to set values in date/time setting, timer program

setting and function menu setting.

• Press to reduce the vertical shifting of the picture in

the Still mode.

$

[RESET/CANCEL] button

• Normally press this button to reset the tape counter to

0000.

• When the buzzer sounds, press this button to stop the

buzzer sound.
Alarm and sensor buzzer will not stop sounding.

• In the Timer Program Setting mode, press this button

to cancel the program settings.  For details, refer to
"Timer Recording" on page 31.

%

[AL/PL RESET] alarm/power loss reset button

Press this button to stop alarm recording or reset the
alarm input or power loss data.  For details, refer to
page 34.

^

[OPE. LOCK] button

Press to activate the operation lock function.

Summary of Contents for SR-L910E





























Reviews: