Filename [DVM70S_13Subsidiary.fm]
Masterpage:Left+
74
EN
SUBSIDIARY SETTINGS
Page 74Monday, 27 December 2004 14:08
Guide Programme Number Set
1
Press
SET UP
to access the Main Menu screen.
2
Press
D E
to select
A
INITIAL SET UP
B
, then press
G
.
3
Press
D E
to select
A
TUNER
SET
B
, then press
G
.
4
Press
FGD E
to select
A
GUIDE PROG SET
B
, then
press
ENTER
.
5
Press
F G
to select
A
GUIDE
PROG
B
, then press
ENTER
.
6
Press
F G
to select the Guide
Programme number for the
desired station as shown in the
TV listings. Then press
ENTER
.
7
Press
F G
to select
A
TV
PROG
B
, then press
ENTER
.
Press
F G
to select the number of the unit’s channel position
on which the Guide Programme number’s broadcast is received
by the unit or the satellite receiver. Then press
ENTER
.
●
Repeat steps
5
–
7
as necessary.
8
Press
SET UP
to complete the setting.
Your unit needs to memorise all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area to call
them up by using the
PR +/–
buttons without going through any
vacant channels.
Auto Channel Set
1
Press
SET UP
to access the Main Menu screen.
2
Press
D E
to select
A
INITIAL SET UP
B
, then press
G
.
3
Press
D E
to select
A
TUNER SET
B
, then press
G
.
4
Press
FGD E
to select
A
AUTO
CH SET
B
, then press
ENTER
.
5
Press
FGD E
to select your
country’s name, then press
ENTER
.
6
Press
FGD E
to select the
language of your choice.
7
Press
ENTER
twice.
●
When you have connected the
unit to a TV offering T-V Link
via a fully-wired 21-pin SCART
cable (
A
pg. 16), the unit
automatically performs the
Preset Download and the T-V
LINK screen will appear.
(
A
pg. 18)
●
The Auto Set screen appears,
and remains on screen while the unit searches for receivable
stations.
b
System Setup
IMPORTANT:
Normally, Auto Set Up (
A
pg. 17), Preset Download (
A
pg. 18)
or Auto Channel Set (
A
pg. 74) sets the Guide Programme
numbers automatically. You need to set the Guide Programme
numbers manually only in the following cases.
●
When timer-programming with the
a
system, the
channel position, where the station you wish to record is
received on your unit, is not selected,
OR
when you add a channel after Auto Set Up, Preset Download
or Auto Channel Set has taken place,
^
Set the Guide Programme number for that station manually.
●
When you wish to timer-record a satellite programme with the
a
system,
^
Set the Guide Programme numbers for all satellite
broadcasts received on your satellite receiver.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
Guide Programme Number
A
Guide Programme (GUIDE PROG) number
B
refers to the
assigned TV station numbers, according to broadcast area, for
the
a
timer recording. The Guide Programme Numbers
can be found in most TV listings.
13
12
11
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
AUTO CH SET
MANUAL CH SET
HDD/DVD/DV SET FUNCTION SET UP
INITIAL SET UP
TUNER SET
CLOCK SET
GUIDE PROG SET
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
13
12
11
YLE2 1
1
ENTER
SELECT
SET UP
EXIT
INITIAL SET UP > GUIDE PROG SET
RETURN
TV PROG
GUIDE PROG
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
Tuner Set
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
IMPORTANT:
Perform the following steps only if
^
^
Auto Channel Set has not been set correctly by Auto Set Up
or by Preset Download. (
A
pg. 17, 18)
^
you have moved to a different area or if a new station starts
broadcasting in your area.
FGDE
ENTER
SET UP
CABLE/SAT
DVD
TV
13
12
11
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
HDD/DVD/DV SET FUNCTION SET UP
INITIAL SET UP
TUNER SET
CLOCK SET
AUTO CH SET
MANUAL CH SET
GUIDE PROG SET
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
ENTER
SELECT
SET UP
EXIT
INITIAL SET UP > AUTO SET
AUTO SET
PLEASE WAIT...
CANCEL
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
DVM70S_00.book Page 74 Monday, December 27, 2004 2:08 PM
