Filename [DVM70S_07HDD Operation.fm]
Masterpage:Left+
38
EN
BASIC OPERATIONS ON HDD DECK
Page 38
Monday, 27 December 2004 14:08
Instant Replay
You can move back the playback position slightly.
Press
w
on the remote control or
INSTANT REPLAY
on the unit.
●
Each press skips back for approximately 7 seconds and resumes
playback.
●
Pressing while paused skips back for approximately 7 seconds
and resumes pause.
1.5x Speed Playback
You can play back a title quickly. The sound will also be played
back faster than normal speed during 1.5x speed playback.
1.5x speed playback cannot be performed during recording on
HDD or DVD.
1
Press
O
to locate the point to start 1.5x speed playback from.
2
Press
I
to resume playback.
3
Press
N
once.
●
Pressing
ON SCREEN
displays
A
X1.5
B
on the top right corner of
the screen.
NOTE:
When the unit is connected with a digital audio device using an
optional optical cable, set
A
DIGITAL AUDIO OUT
B
to
A
PCM ONLY
B
.
(
A
pg. 26)
Jump Search
You can locate a scene ahead or behind the current one by
jumping scenes according to selected time intervals (
A
pg. 73)
during playback (or Live Memory Playback).
Press
JUMP –
or
JUMP +
.
●
To advance forward or back, press
JUMP –
or
JUMP +
repeatedly within 5 seconds of each press to continue jump.
●
Depending on the time from where you want to start jump search,
the first press of
JUMP –
or
JUMP +
will not necessarily lead to a
jump of the selected time interval. The first press will lead to a
jump to the nearest quarter points of an hour (15 min/ 30 min/ 45
min/ 00 min). The subsequent jumps will then be in accordance
to the selected time interval.
●
When you cannot advance any further (beginning or end of
programme reached), the message
A
UNABLE TO GO BACK
ANY MORE
B
appears on the screen and the on-air screen
resumes. In such a case, press
S
,
O
or
o
.
Example:
Playback search when jump interval is set to 15 MIN jumps.
Taking for instance, you want to start jump search 40 minutes after
the beginning of the programme. Pressing
JUMP –
or
JUMP +
will
result in a jump to the scene at the 30 minutes point or 45 minutes
point respectively as illustrated below. At the subsequent press,
the scene will jump to the 15 minutes point or 1 hour point
respectively, according to the selected time interval, which in this
case is
A
15 MIN
B
.
Marking Positions To Play Back Again Later
It is possible to mark positions (up to 999 points) where you want
to play back once again later, and start playback from a marked
position. Marking onto the disc when recording is helpful to locate
a start point when you play back the disc later.
To mark positions:
During playback, press
MARK
at
positions you want to mark.
●
A
MARK
B
appears on the TV screen.
You can easily locate the marked
positions using
S
or
T
when
you play back the disc.
To delete the marked positions:
While paused, press
S
or
T
to
locate a marked position you want to
delete, then press
MARK
.
●
Crossed
A
MARK
B
appears on the
TV screen, and the marked position
is deleted.
NOTE:
When a monaural programme changes to a stereo programme
while recording, a mark signal is automatically recorded.
Time counter
Beginning of programme
Current scene
End of programme
0 min
30 min
1 h
40 min
1 h 15 min
15 min
45 min
DVM70S_00.book Page 38 Monday, December 27, 2004 2:08 PM
