manualshive.com logo in svg

JVC SP-UXQD9S, Service Manual

Share
Download
JVC SP-UXQD9S Service Manual Download Page 29

(No.MB338)1-29

LCD indication

UPGRADE

Press the [   ] key on a remote controller.

Upgrade starts.

Take out the disc from the tray after
opening the tray automatically.

Upgrade is complete.

2. Upgrade of back-end firm

This set can do upgrade of a back-end firm
with an upgrade disc.

LCD indication

NO DISC

Source : DVD

Press the [POWER] key on the
main unit and put the main body
into a standby mode.

Press the [OPEN/CLOSE] key
on the main unit to open the tray.

Insert the upgrade disc.

Press the [OPEN/CLOSE] key
on the main unit to close the tray.

Press the [OPEN/CLOSE] key
on the main unit to close the tray.

Press the [POWER] key on the
main unit and put the main body
into a standby mode.

LCD indication

UPGRADE

Take out the disc from the tray after
opening the tray automatically.

Upgrade is complete.

3. Upgrade of system microcomputer
    (ROM correction)

This set can do upgrade of a microcomputer
with a ROM correction disc.

LCD indication

NO DISC

Source : DVD

Press the [POWER] key on the
main unit and put the main body
into a standby mode.

Press the [OPEN/CLOSE] key
on the main unit to open the tray.

Insert the ROM correction disc.

Press the [OPEN/CLOSE] key
on the main unit to close the tray.

Press the [OPEN/CLOSE] key
on the main unit to close the tray.

Press the [POWER] key on the
main unit and put the main body
into a standby mode.

LCD indication

UPGRADE & ROM CORR

Upgrade starts automatically.

LCD indication

COMPLETE

Pull the power cord
out of the outlet.  

Pull the power cord
out of the outlet.  

LCD

[POWER] key

[OPEN/CLOSE] key

[   ] key

Summary of Contents for SP-UXQD9S










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands