background image

– 2 –

 Precautions for installation

• To prevent deformation or discoloration of the cabinet, do not

install the unit where it is exposed to direct sunlight or high
humidity, and avoid installation near air conditioning outlets.

• Speaker vibrations may cause howling. Place the unit as far

away from the player as possible.

• Take the occurrence of earthquakes or other physical shocks

into consideration when selecting the installation place, and
secure the unit thoroughly.

• Tuner reception may become noisy or hissing if this unit is

installed nearby the tuner. In this case, leave a more distance
between the tuner and this unit or use an outdoor antenna for
better tuner reception without interference from this unit.

• This unit is magnetically shielded to avoid color distortions on TVs.

However, if not installed properly, it may cause color distortions.
So, pay attention to the following when installing the unit.
– When placing this unit near a TV set, turn off the TV’s main

power switch or unplug it before installing this unit.
Then wait at least 30 minutes before turning on the TV’s main
power switch again.

Some TVs may still be affected even though you have followed
the above. If this happens, move this unit away from the TV.

• When the TV screen shakes, move this unit away from the TV

to find a position where the screen doesn’t shake and then set
the unit there.

• Do not connect the AC power cord until all other connections

have been made.

 Precautions for Daily Use

• To maintain the appearance of the unit

Wipe with a dry, soft cloth if the cabinet or control panel should
become dirty.
If very dirty, apply a small amount of water or neutral detergent
to the cloth and wipe clean. Then wipe with a dry cloth.

• To improve the sound field

If the speakers are facing a solid wall or glass door, etc., it is
recommended to furnish the wall with materials that absorb
sounds, for example by hanging up thick curtains, to prevent
reflections and standing waves.

 Checking the Supplied Accessories

Check to be sure you have the following supplied accessories.
The number in parenthesis indicates the quantity of the piece
supplied.

Monaural audio cord (1)

AC plug adaptor (1)

If the item mentioned above is missing, contact your dealer
immediately.

Contents

Warnings, Cautions and Others ................................... 2
Connections .................................................................. 3
Operations ..................................................................... 3
Additional Information .................................................. 4

20 cm

20 cm

15 cm

15 cm

20 cm

10 cm

Thank you for purchasing a JVC speaker.
Before you begin using it, please read the instructions carefully to be sure you get the best possible performance. If you have any
questions, consult your JVC dealer.

To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.

 Caution—POWER switch

This apparatus is provided with the POWER switch to minimize
power consumption for safe use. Therefore,
1. Before doing initial settings, complete all the connections

required, connect the mains plug into the wall outlet, then set
the POWER switch to ON [ 

 ].

2. When not in use, set the POWER switch to OFF [ 

 ].

This disconnects the mains line.

 Cautions

• Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get out.)

• Do not place any naked flame sources, such as lighted candles,

on the apparatus.

• When discarding batteries, environmental problems must be

considered and local rules or laws governing the disposal of
these batteries must be followed strictly.

• Do not expose this apparatus to rain, moisture, dripping or

splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.

Warnings, Cautions and Others

Front view

Side view

Front

 Caution—Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage,
locate the apparatus as follows:
1 Front:

No obstructions and open spacing.

2 Sides/ Top/ Back:

No obstructions should be placed in the areas shown by the
dimensions below.

3 Bottom:

Place on the level surface. Maintain an adequate air path for
ventilation by placing on a stand with a height of 10 cm or
more.

SP-DWF10_Eng.pm65

4/27/04, 9:23 AM

2

Summary of Contents for SP-DWF10





















Reviews: