JVC RX-DV31 Page 6 Instructions Manual Download

Page: 6 / 80

English

Precautions

General Precautions

• DO NOT insert any metal object into the unit.

• DO NOT disassemble the unit or remove screws, covers, or

cabinet.

• DO NOT expose the unit to rain or moisture.

Locations

• Install the unit in a location that is level and protected from

moisture.

• The temperature around the unit must be between 5˚C and

35˚C.

• Make sure there is good ventilation around the unit. Poor

ventilation could cause overheating and damage the unit.

Handling the unit

• DO NOT touch the power cord with wet hands.

• DO NOT pull on the power cord to unplug it. When

unplugging the cord, always grasp the plug so as not to
damage the cord.

• Keep the power cord away from the connecting cords and

the antenna. The power cord may cause noise or screen
interference. It is recommended to use a coaxial cable for
antenna connection, since it is well-shielded against
interference.

• When a power failure occurs, or when you unplug the

power cord, the preset settings such as preset FM or AM
channels and sound adjustments may be erased in a few
days.

Before Installation

Checking the Supplied Accessories

Check to be sure you have all of the following supplied
accessories.
The number in the parentheses indicates the quantity of the
pieces supplied.

• Remote control (1)

• Batteries (2)

• AM loop antenna (1)

• FM antenna (1)

• Composite video cord (1)

• AC plug adaptor (1)

If anything is missing, contact your dealer immediately.

Adjusting the Voltage Selector

Before connections, always do the following first if necessary.

Select the correct voltage in VOLTAGE SELECTOR on the
rear by using a screw driver.

Check to be sure if the voltage mark is set to the voltage for
the area where you use this unit.

• Times given for various operations are for reference only.

Actual time will vary somewhat.

• The following mark is used in this manual to indicate

available disc types for the operations explained in each
section. Unavailable disc types are shown in halftone
color.

VOLTAGE

SELECTOR

110V

127V

230-240V

220V

VOLTAGE

SELECTOR

110V

127V

230-240V

220V

Voltage mark

01-11_RX-DV31SL[UW]f.p65

03.4.22, 18:55

Summary of Contents for RX-DV31

















































































Search results

Summary of Contents for RX-DV31

Reviews:

Related manuals for RX-DV31

Brands by name

Popular brands

JVC RX-DV31, Instructions Manual

Search results

Summary of Contents for RX-DV31

Reviews:

Related manuals for RX-DV31

Brands by name

Popular brands