JVC RX-8030VBK Instructions Manual Download Page 37

Page: 37 / 52

Activating the Surround Modes

Available Surround modes vary depending on the speaker settings
and the incoming signals. (See page 34.)

Activating one of the Surround modes for a source automatically
recalls the memorized settings and adjustments (see pages 23 to
31.)

You can also use the buttons on the remote control for the same
functions.

Activating the EX/ES setting

For multi-channel digital software, you can activate the EX/ES (7.1-
channel) reproduction mode.
• Once you have set EX/ES (7.1-channel) reproduction mode, it is

stored in memory and will be called up whenever you activate the
Surround mode which the memorized EX/ES (7.1-channel)
reproduction mode can be applied to.

Press EX/ES to select an appropriate setting for your enjoyment.

The currently selected EX/ES (7.1-channel) reproduction mode
appears on the display.
• Each time you press the button, it changes as follows:

EX/ES AUTO

According to the incoming signal, an
appropriate Surround mode is applied.
• For Dolby Digital EX and DTS-ES,

EX/ES (7.1-channel) reproduction is
applied.

• For 5.1-channel (or less) encoded

software, 5.1-channel reproduction is
applied.

EX/ES ON

Select to apply EX/ES (7.1-channel)
reproduction to both 5.1-channel and 6.1-
channel encoded software.

EX/ES OFF

Select to cancel the EX/ES (7.1-channel)
reproduction.

If the surround back speakers are not connected or deactivated,
Virtual 6.1-channel surround is applied.

Notes:

• When Surround mode is deactivated, pressing EX/ES will

activate an appropriate Surround mode for the current source.

• When an analog or digital 2-channel source is playing, you can

adjust the EX/ES (7.1-channel) reproduction mode and store
the setting, but it will not affect the current source.

• When the source is one to which the EX/ES (7.1-channel)

reproduction cannot be applied, you can adjust the setting and
store in memory, but reproduction channels will remain
unchanged.

Activating the Surround Modes

1. Select and play any source other than “DVD

MULTI.”

• Make sure you have selected the analog or digital input mode.
• Surround modes are not valid for DVD MULTI playback

mode.

2. Press SURROUND to activate the Surround

mode.

•

For multi-channel digital software (except 2-channel and
Dual Mono software),

incoming signals are automatically

detected and the appropriate surround mode is activated (see
page 33 for details).

– If the EX/ES (7.1-channel) reproduction mode has been set

to “AUTO” or “ON,” one of the EX/ES (7.1-channel)
reproduction modes will be activated (see the left column).

•

For analog sources and digital 2-channel software,

you can

select one of the following Surround modes. Each time you
press SURROUND, Surround modes change as follows:

•

For Dual Mono software,

you can select the channel you

listen to. (See page 27.)

To adjust the speaker output level,

see pages 30 and 31.

To cancel the Surround mode

Press SURROUND/DSP OFF (or SURR/DSP OFF on the remote
control). “SURR OFF” appears on the display.

Ex. When “DOLBY D” is activated.

VOLUME

LINEAR PCM

DIGITAL

SUBWFR

LFE

DIGITAL AUTO

SPEAKERS 1

VOLUME

LINEAR PCM

DIGITAL

SUBWFR

DUAL

DIGITAL AUTO

SPEAKERS 1

VOLUME

LINEAR PCM

SUBWFR

ANALOG

PRO LOGIC

SPEAKERS 1

NEO:6CINMA

NEO:6MUSIC

PL II MOVIE

PL II MUSIC

PRO LOGIC

RX-8030V AUDIO/VIDEO CONTROL RECEIVER

32_38_8030[UJ]f.p65

03.6.17, 8:21 PM

Summary of Contents for RX-8030VBK





















































Search results

Summary of Contents for RX-8030VBK

Reviews:

Related manuals for RX-8030VBK

Brands by name

Popular brands

JVC RX-8030VBK, Instructions Manual

Search results

Summary of Contents for RX-8030VBK

Reviews:

Related manuals for RX-8030VBK

Brands by name

Popular brands