JVC RX-664VBK Instructions Manual Download Page 47

Page: 47 / 56

IMPORTANT:

To operate JVC video components using this remote control:
•

You need to connect JVC video components through the AV COMPU LINK jacks
(see page 41).

•

When operating the VCR and DVD player, aim the remote control directly at the
remote sensor on the each component.

•

When operating the TV having AV COMPU LINK "RECEIVER/AMP,” aim the
remote control directly at the remote sensor on the receiver.

•

When operating the TV having AV COMPU LINK ”AV COMPU LINK EX,” aim
the remote control directly at the remote sensor on the TV.

After pressing VCR, you can perform the
following operations on the VCR:

Starts playback.

Rewinds a video tape.

Fast winds a video tape.

Stops operation.

Pauses. To resume playing, press

CH +/–

Changes the TV channel on the VCR.

You can always do the following on the VCR:
VCR

Turn on and off the VCR

(in the POWER section)

After pressing TV SOUND, you can perform the
following operations on the TV:
CH +/–

Changes the channels

1–9, 0, 100+

Selects the channels.

RETURN

Alternates between the previously
selected channel and the current channel.

You can always do the following on the TV:
TV /–

Adjust the volume.

TV/VIDEO

Sets the input mode (either TV or
VIDEO)

Turns on or off the TV

(in the POWER section)

After pressing DVD or DVD MULTI, you can perform the
following operations on the DVD player:

Starts playing.

Returns to the beginning of the current (or previous) track. (When pressed
briefly.)

Skips to the beginning of the next track. (When pressed briefly.)

Fast reverse a disc. (When pressed and held.)

Fast foward a disc. (When pressed and held.)

Stops playing.

Pauses. To resume playing, press

After pressing DVD or DVD MULTI, these buttons can be used for the
DVD menu operations.

Note:

If you choose a source on the front
panel, the remote control will not
operate that source.

100+

RETURN/

ENTER

7/P

+10

DAP MODE

3D-PHONIC

SURROUND

– REAR•R +

EFFECT

DELAY

TEST

SEA MODE

SEA PRESET

Note:

For detailed menu operations, refer to
the instructions supplied with the discs
and the DVD player.

CATV/SAT

ONE TOUCH
OPERATION

TV/VIDEO

CATV

CONTROL CD-DISC

SOUND

CONTROL

VCR

AUDIO

CENTER

REAR

(L)

VOLUME

100+

RETURN/ENTER

7/P

+10

PHONO

VCR

MUTING

VOLUME

DVD MULTI

TAPE

DVD

POWER

TUNER/

BAND

SOUND

RM-SR664U

REMOTE CONTROL

DAP MODE

3D-PHONIC

SURROUND

EFFECT

DELAY

TEST

SEA MODE

SEA PRESET

– REAR•R +

SLEEP

RX-664VBK(J)_0119-001B_En.24-50

98.1.6, 11:30 AM

Summary of Contents for RX-664VBK

























































Search results

Summary of Contents for RX-664VBK

Reviews:

Related manuals for RX-664VBK

Brands by name

Popular brands

JVC RX-664VBK, Instructions Manual

Search results

Summary of Contents for RX-664VBK

Reviews:

Related manuals for RX-664VBK

Brands by name

Popular brands