57
Note:
Refer also to the manuals
supplied with your video
components.
FUNCTIONS:
This remote control system allows you to use five functions listed below.
Remote Control of DVD Player, VCR, and TV Using This Remote
Control
For the DVD player and the VCR:
• Aim the remote control directly at the remote sensor on the each component.
For the TV having AV COMPU LINK terminal “RECEIVER/AMP”:
• Aim the remote control directly at the remote sensor on the receiver when
operating the TV.
For the TV having AV COMPU LINK terminal “AV COMPU LINK EX”:
• Aim the remote control directly at the remote sensor on the TV when operating the
TV.
One-Touch Video Play
Simply by inserting a video cassette without its safety tab into the VCR1 (the VCR
connected to the VCR1 jacks), you can enjoy the video playback without setting other
switches manually.
The receiver automatically turns on and changes the source to “VCR1.”
The TV automatically turns on and changes the input mode to the position so that you
can view the playback picture.
When you insert a video cassette with its safety tab, press the play (
3
3
3
3
3
) button on the
VCR1 or on the remote control. So, you can get the same result.
One-Touch DVD Play
Simply by starting playback on the DVD player, you can enjoy the DVD playback
without setting other switches manually.
The receiver automatically turns on and changes the source to “DVD”— “DVD” is
automatically selected.
The TV automatically turns on and changes the input mode to the position so that you
can view the playback picture.
Automatic Selection of TV’s Input Mode
•
When you select “TV SOUND” as the source to play on the receiver, the TV
automatically changes the input mode to the TV tuner so that you can watch TV.
•
When you select “VCR2,” as the source to play on the receiver, the TV
automatically changes the input mode to the Video Input 2 so that you can watch the
playback picture.
•
When you select “DVD,” “VCR1,” “VIDEO” or “DBS” as the source to play on the
receiver, the TV automatically changes the input mode to the appropriate position
(either Video Input 1 or Video Input 2) so that you can view the playback picture.
Automatic Power On/Off (Standby)
The TV, VCR1 (the VCR connected to the VCR1 jacks), and DVD player turn on and
off along with the receiver.
•
When you turn on the receiver;
•
If the previously selected source is “VCR1,” the TV and VCR1 will turn on
automatically.
•
If the previously selected source is “VIDEO” or “TV SOUND,” only the TV
will turn on automatically.
•
If the previously selected source is “DVD,” the TV and DVD player will turn on
automatically.
When you turn off the receiver, the TV, VCR1 and the DVD player will turn off.
Note:
When you select “TV SOUND”
as the source on the receiver,
you cannot see the menu on the
TV screen since the AV COMPU
LINK remote control system
automatically changes the TV’s
input mode to the TV tuner.
If you do not mind stopping
listening to the TV sounds, you
can then show the on-screen
displays after changing the TV’s
input mode to the appropriate
position (either Video Input 1 or
Video Input 2) the receiver is
connected to.
Note:
If you turn off the receiver while
recording on the VCR1, the
VCR1 will not turn off, but
continue recording.
EN56_70.RX-1024V[J]/1.PM5
98.5.12, 0:44 PM
57
