23
Receiving Radio Broadcasts
You can browse through all the stations or use the preset function to go immediately to a particular
station.
IMPORTANT:
When using the Remote Control, check to see if its remote control
mode selector is set to the correct position:
To operate this receiver, set it to “AUDIO/TV/VCR” (except when
selecting the DBS tuner as the source).
Tuning in Stations Manually
On the front panel:
1. Press FM/AM TUNING to select the band.
Each time you press the button, the band alternates between
FM and AM.
2. Turn MULTI JOG until you find the frequency you
want.
• Turning it clockwise increases the frequency.
• Turning it counterclockwise decreases the frequency.
From the remote control:
1. Press FM or AM to select the band.
2. Press TUNING DOWN or TUNING UP repeatedly
until you find the frequency you want.
Using Preset Tuning
Once a station is assigned to a channel number, the station can be quickly tuned. You
can preset up to 40 stations at random.
To store the preset stations
On the front panel
only:
1. Tune in the station you want to preset (see above).
If you want to store the FM reception mode for this station, select the FM reception
mode you want. See page 24 for details.
2. Press TUNER/SEA MEMORY.
“CH-” appears and the channel number position starts flashing
on the display for about 5 seconds.
3. Turn MULTI JOG to select a channel number while
the channel number position is flashing.
4. Press TUNER/SEA MEMORY again while the
selected channel number is flashing on the display.
The selected channel number stops flashing.
The station is assigned to the selected channel number.
FM/AM TUNING
MULTI JOG
Notes:
• When you turn MULTI JOG
quickly or hold the TUNING
UP or TUNING DOWN in step
2, the frequency keeps
changing until a station is
tuned in.
• When a station of sufficient
signal strength is tuned in, the
TUNED indicator lights up on
the display.
When an FM stereo program
is received, the STEREO
indicator also lights up.
TUNER
/SEA
MEMORY
MULTI JOG
TUNER
/SEA
MEMORY
Note:
You can use the 10 keys on the
remote control to select the
preset number. When using the
10 keys, be sure that they are
activated for tuner, not for the
CD and others. (See page 58.)
AM
FM
/REW
DOWN
TUNING
FF/
UP
AUDIO/
TV/VCR
CATV
DBS
EN23_27.RX-1024V[J]/1.PM5
98.5.12, 0:24 PM
23