Name of Parts
Front panel
.
A
B
C
D
E
F
G
H
I
J
A
USER1 button
For switching the settings menu.
B
F1 knob
Used for the multi-function settings.
C
F2 knob
Used for the multi-function settings.
D
USER2 button
For switching the settings menu.
E
Zoom lever
For performing the zoom operation of the remote camera.
F
ALARM lamp
Red
: Lights up when the alarm is activated.
G
POWER lamp
Green : Lights up while the power is on.
H
Control lever (F3)
0
For operating pan/tilt of the remote camera.
0
Used for the multi-function settings.
I
Focus knob/Push auto button
0
For performing the focus operation of the remote camera.
0
Used for the one-push auto focus function.
J
Operation panel
Used as a touch panel.
Rear panel
.
A B C D E
F G
I
H
A
Power switch
For turning the power on or off.
B
Cable clamp
For preventing the AC adapter cable from falling out.
C
DC 12V terminal
For connecting the supplied AC adapter.
D
LAN terminal
For connecting a LAN cable.
E
SERVICE terminal
For use during servicing.
F
TALLY terminal
Used for TALLY connection.
G
SETTING switch
1 to 4
: For switching TALLY IN and OUT.
5 to 8
: Used for servicing only.
H
SERIAL terminal
Not used.
I
Rating label
Basic Operations
For details, refer to the instruction manual.
1
Turn on the power.
0
Set the power switch at the rear of this unit to “On”. The
LED lamp lights up in green.
2
Configure the settings of this unit.
0
Set the IP address of this unit as follows.
A
Select [SETTINGS] on the top screen of the control
panel.
0
If the top screen doesn’t appear, select [HOME].
B
Select [Network].
C
Select [CONTROLLER].
0
The IP address setting screen appears.
D
Enter the IP address and press [ENTER].
3
Configure the camera setting.
0
Set the camera to be operated as follows.
A
Select [SETTINGS] on the top screen of the control
panel.
0
If the top screen doesn’t appear, select [HOME].
B
Select [Network].
C
Select [CAMERA REGISTRATION].
D
Select [AUTO] to register the camera.
Memo :
0
For details on the [MANUAL] settings, please refer
to the “INSTRUCTIONS” on the website.
0
To change the camera to be operated, perform the above
operations again.
Name of Parts
9
Gettin
g Started
