6
Basic Ope
rations
Setting the Clock
• To return to the previous step, press [CANCEL].
• To cancel the setting during the process, press [CLOCK/
TIMER].
1
Activate the clock setting mode.
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is selected.
2
Set the time.
• Adjust the hour, then the minute.
• You can also use the number buttons to adjust the hour
and minute.
Now the built-in clock starts working.
To check the current clock time during play
Adjusting the Sound
To adjust the subwoofer volume
You can adjust the subwoofer volume from 1 to 6.
To adjust the tone
You can adjust the middle range and treble level from –5 to
+5.
To adjust the middle range
To adjust the treble
Changing the Display Brightness
You can dim the display window.
Changing the Character Size
For some indications, you can change the character size on
the display.
Turning Off the Power Automatically
When Auto Standby is in use, the A.STANDBY indicator
lights up on the display.
Auto Standby starts working (the A.STANDBY indicator
starts flashing) in the following cases:
• CD: Playback stops or no disc is inserted.
• USB MEMORY: Playback stops or USB mass storage
class device is disconnected.
• iPod: The iPod is disconnected.
• LINE: Playback stops or no component is connected.
If no operation is done or no signal comes in for about 3
minutes after the indicator starts flashing, the System turns
off (on standby) automatically.
DO NOT turn off (on standby) the System with
the volume set to an extremely high level;
otherwise, the sudden blast of sound may damage
your hearing, speakers and/or headphones when
you turn on the System or start playback.
Remote control:
Main unit:
Remote
ONLY
CLOCK
0:00
10:46
Source information
Clock
Remote
ONLY
MIDDLE
TREBLE
MIDDLE
TREBLE
Remote
ONLY
DIMMER OFF
DIMMER ON
Normal
Dimmed
Remote
ONLY
Large character
Normal character
Remote
ONLY
SET
CANCEL
Canceled
On
RD-HA3[A].book Page 6 Friday, June 1, 2007 5:37 PM
