16
L
iste
n
ing
to Exte
rnal Comp
onen
ts
Adjusting the Audio Input Level
If the sound from the component connected to the LINE IN
jack is too loud or is too quiet when changing from another
source to “LINE,” you can change the audio input level
through the LINE IN jack (without changing the volume
level).
While LINE is selected as the source...
Switching to LINE Automatically
—QP Link
Quick Portable Link (QP Link) automatically switches the
source to LINE as the auxiliary equipment connected to the
LINE IN jack starts playback.
• Make sure to set the volume of your portable audio device
loud enough so that the System can detect the sound signal.
• QP Link does not work when the System is operating on
batteries.
To activate QP Link
When QP Link is activated, connecting a portable device to
the LINE IN jack and starting playback performs the
following:
• While listening to another source...
Changes the source to LINE automatically. (If you change
from LINE to another source, QP Link will be canceled.)
• While the System is on standby...
Turns on the System and changes the source to LINE
automatically (not applicable when the display is turned
off).
To deactivate QP Link
Changing the QP Link Sensitivity
You can change the LINE IN jack sensitivity if QP Link
malfunctions by detecting non-playback signals such as
switching noises from the auxiliary equipment.
While LINE is selected as the source...
LEVEL 1
Select this when the sound is too loud with
“LEVEL 2” selected. This setting is
recommended when connecting an audio
device other than a portable audio device
to the LINE IN jack.
LEVEL 2
Select this when the sound is too loud with
“LEVEL 3” selected.
LEVEL 3
Select this when listening to a portable
audio device (initial setting).
Remote
ONLY
LEVEL 1
LEVEL 3
LEVEL 2
2 sec
Remote
ONLY
QP LINK
QP LINK ON
“QP LINK OFF” appears on the
display and the QP LINK indicator
disappears.
QP: LEVEL1
Normally select this. (Initial setting)
QP: LEVEL2
Select this when QP Link works
mistakenly.
Remote
ONLY
QP: LEVEL1
QP: LEVEL2
2 sec
RD-HA3[A].book Page 16 Friday, June 1, 2007 5:37 PM