7
English
SETTING THE CLOCK
STANDBY
REMOTE
SENSOR
FM MODE
STOP
CD
TUNER/
BAND
TAPE
VOLUME
EQ
STANDBY/
ON
RANDOM/
PRESET –
PUSH
OPEN/CLOSE
REPEAT/
PROGRAM/
CLOCK
HBS
PRESET
FOLDER
REPEAT
STANDBY/
ON
1
4
7
9
RANDOM
TAPE
MUTING
2
5
8
REMOTE CONTROL UNIT
RM-SRCEZ34 A
0
CD/ /
DISPLAY
3
6
PROGRAM
EQ
VOL
CLOCK
TUNER
2,3,4
3,4
2,3,4
1
1
3,4
Before operating the unit any further, first set the clock
built in this unit.
The clock uses 12-hour indication as default. “AM
12:00” indicates midnight, and “PM 12:00” indicates
noon.
1
Press STANDBY/ON
to turn off the unit, if it
is turned on.
The clock flashes on the display window.
2
Press and hold PROGRAM/CLOCK for more than
2 seconds.
The hour digits start flashing.
3
Press
4
or
¢
to adjust the hour, then press
PROGRAM/CLOCK.
The minute digits start flashing.
4
Press
4
or
¢
to adjust the minutes, then press
PROGRAM/CLOCK.
Notes:
• If there is a power failure, the clock indication starts
flashing. The clock indication will keep flashing until
you set the clock again.
• You can change the clock to 24-hour indication.
1
Press STANDBY/ON
to turn off the unit, if
it is turned on.
The clock flashes on the display window.
2
Press and hold PROGRAM/CLOCK for more
than 2 seconds.
“12” of “AM 12:00” starts flashing.
3
Press FM MODE.
The clock is changed to 24-hour indication.
