9
11
10
12
GVT0277-016B
NX-D4
INSTRUCTIONS—Operating Guide
GVT0277-016B EN_NX-D4[A] Operating Guide
GVT0277-016B EN_NX-D4[A] Operating Guide
GVT0277-016B EN_NX-D4[A] Operating Guide
GVT0277-016B EN_NX-D4[A] Operating Guide
Enjoying Movies/Music from your iPod
Compatible iPod Models
iPod model
Audio
Video
Ta
g
inf
orma
tion
C
omposite
C
o
mponen
t
iPod nano
1GB/2GB/4GB
✓
—
—
✓
iPod nano
(2nd generation)
2GB/4GB/8GB
✓
—
—
✓
iPod nano
(3rd generation)
4GB/8GB
✓
✓
✓
✓
iPod nano
(4th Generation)
8GB/16GB
✓
✓
✓
✓
iPod mini 4GB
✓
—
—
—
iPod mini
(2nd Generation)
4GB/6GB
✓
—
—
—
iPod with color
display 20GB/60GB
✓
—
—
—
iPod (Click Wheel)
20GB/40GB
✓
—
—
—
iPod classic
80GB/120GB/
160GB
✓
✓
✓
✓
iPod photo
30GB/40GB/60GB
✓
✓
*
1
—
—
iPod
(5th Generation)
30GB/60GB/80GB
✓
✓
—
✓
iPod touch
8GB/16GB/32GB
✓
✓
*
2
✓
*
2
✓
iPod touch
(2nd Generation)
8GB/16GB/32GB
✓
✓
✓
✓
*
1
Only for still picture.
*
2
To view a video/picture from iPod touch on your
TV, update iPod touch software to the latest version.
(Any additional charges may apply.) For details
about updating iPod, check on the Apple web site
<http://www.apple.com>.
To connect an iPod
Connect an iPod to dock A or B on the unit. You can have 2
iPod devices connected at the same time.
• Make sure the unit is on standby when you connect the
iPod.
• When you connect iPod to the dock, make sure the
terminal on the dock is fully inserted into iPod.
• After connecting iPod, wait until the unit is ready for
operation (about 3 seconds).
• Be careful not to damage the terminal on the dock when
connecting / disconnecting the iPod.
• Do not touch or hit the terminals of the dock and of iPod.
It might cause damage to these terminals.
• Always set the volume to the minimum level when
connecting or disconnecting iPod.
• Turn off the unit when disconnecting iPod.
• Do not carry the unit with iPod connected. You might
drop it down or it might cause damage to the connector
part.
• Remove iPod from the dock when you do not use it.
Playing Back iPod Devices
• Before viewing a video/picture from iPod on your TV,
make the appropriate video setting on iPod. For details of
the setting, see the instruction manual for iPod.
• For iPod touch
Operate iPod touch itself in the following cases:
–when operating the home button
–when selecting application icons on the home screen
–when dragging the slider
• When you cannot operate iPod connected through the unit
or using the remote control, operate iPod itself.
To start
To pause
To forward or reverse skip
While playing…
To fast-forward or fast-reverse the track
While playing…
Repeat play back
Press REPEAT to change the repeat playback settings. Press
once for track repeat, twice for repeat all, and once more to
cancel. The System displays “REPEAT” only (iPod display
changes).
• Refer to the instruction manual for the iPod for details.
To go back to the previous menu
To select an item on the menu
• To confirm an item on the menu, press “ENTER/SET.”
Selecting the Video Output
To view an image of the iPod on the TV screen, select the
video output correctly according to the connection method.
1
Before
playing
back...
2
Shuffle Play
Applies Shuffle Play to iPod on Dock A or B selected as the
source. Select the desired shuffle mode.
• The shuffle icon lights up on the display of iPod devices.
• To cancel, press again until the shuffle icon disappears.
Dock adapter
(supplied with the iPod or sold separately)
component
composite
To insert a disc
• When using an 8 cm disc, place it on the inner circle of
the disc tray.
To close the disc tray,
press
0
again.
To prohibit disc ejection (Child Lock)
When the System is turned on and the disc tray is closed,
press
0
while touching
7
(on the main unit).
To cancel the prohibition,
repeat the same procedure.
“UNLOCKED” appears on the display.
To connect a USB device
Playing Back
To start
To pause
To stop
Listening to a Disc/USB Device
To select the file type
If different types of playable files (audio/still picture/ moving
picture) are recorded, select a file type to play.
While playback is stopped...
To select a title/group
While playing...
To select a chapter/track/file
While playing...
• When you press
4
for the first time, you go back to the
beginning of the current chapter/track/ file.
To locate a particular position
While playing...
• This does not function for JPEG files.
To locate an item directly
To select a title/group:
To select a chapter/track/file:
Press a chapter/track/file number using the number buttons.
USB cable (not supplied)
Resume Play
The System can store the stop point, and when you start
playback again by pressing
3
, DVD/CD
6
or USB
6
(even while on standby), it starts from the position where
you have stopped—Resume Play.
To stop completely while Resume is activated,
press
7
twice.
(While holding)
Number buttons
(While holding)
Program Play/Random Play
• Program Play/Random Play cannot be used for “USB,”
DVD-VR and JPEG/MPEG-1/MPEG-2/ASF/DivX files on
a disc, and some DVDs.
Ex:
To exit Program Play or Random Play,
press PLAY MODE
repeatedly until PRGM, RND indicator are all off before or
after playback.
PROGRAM
—To program the playing order.
• You can arrange the playing order of the chapters/tracks/
files (up to 99) before you start playback.
• Resume does not work for Program Play.
For DVD/CD:
1
Press PLAY MODE repeatedly to select PROGRAM.
2
Select chapters/tracks/files you want for Program Play
using the number buttons.
• For DVD Video and MP3/WMA/WAV files:
Select a title or group number, then select a chapter
or track/file number.
3
Repeat step
2
until you complete your program.
4
Start playback.
RANDOM
—To play all the tracks/chapters at random.
Playing Repeatedly
Press REPEAT repeatedly to select Repeat Mode.
• Repeat Mode varies depending on the medias or the files.
REPEAT CHAP
Repeats the current chapter.
REPEAT TITL
Repeats the current title.
REPEAT TRK
Repeats the current track/file.
REPEAT PG
Repeats the current original program.
REPEAT PL
Repeats the current Play List.
REPEAT ALL
Repeats all the contents or programmed
tracks/files.
REPEAT OFF
Canceled.
A-B Repeat
You can play back a desired portion repeatedly.
Repeat the procedure to select the start point (A), then the
end point (B) during playback.
• To cancel A-B repeat, press the same button again.
Unique Video Disc/File Operations
The operations will vary depending on the discs or files.
To select the audio track
You can select the language or the audio channel to listen to.
To select the subtitle language
You can select or turn on/off the subtitle language to display
on the TV.
To select the view angle
You can view the same scene from different angles.
To play back still picture
Press
8
while playing.
To play back frame by frame
Press
8
while displaying the still picture.
To play back slow-motion
Press
8
to display the still picture, then press
1
* or
¡
to
select slow-motion speed.
* Reverse slow motion is only available for DVD Video.
To replay the previous scenes (One-Touch Replay)
While playing...
The playback position moves back about 10 seconds before
the current position (only within the same title for DVD
Video).
Zoom
Press ZOOM repeatedly to select the magnification of the
zoom. You can move the zoomed-in position using the cursor
buttons.
(While holding)
Canceled
(While holding)
To connect an audio player
You can listen to the audio player connected to the AUDIO
IN jack.
• Make sure to turn down the volume on the System to
minimum level before starting playback.
To adjust the audio input level
If the sound from the device connected to the AUDIO IN
jack is too loud or too quiet, you can preset the audio input
level through the AUDIO IN jack (without changing the
volume level).
While “AUDIO IN” is selected as the source...
• As the number of the level increases, the preset input level
is increased.
Listening to an External
Device
Stereo mini plug (not supplied)
From audio output
(or headphone out, etc.)
On-screen Operations for Disc
Operating the On-screen Bar
1
Display the entire on-screen bar while playing.
Ex: While “DVD/CD” is selected as the source...
2
Select (highlight) the function using the cursor
buttons then press ENTER/SET.
Function icons
TIME
Time indications: Press repeatedly ENTER/SET to
change the timer indication.
TIME:
Elapsed playing time of the current chapter/
track (not applicable for DVD-VR).
REM:
Remaining time of the current chapter/track
(not applicable for DVD-VR).
TOTAL:
Elapsed disc time.
T. REM:
Remaining time of title (DVD Video)/original
program (DVD-VR)/disc (SVCD/VCD).
OFF
Repeat Mode: Select the desired option in the pop-up
window using the cursor buttons then press ENTER/
SET.
A-B:
Repeats a desired position.
1
Press ENTER/SET at the start point during play.
2
Press ENTER/SET at the end point during play.
A-B repeat starts.
TITLE:
Repeats the current title.
ALL:
Repeats the disc (not applicable for DVD) or
programmed tracks.
CHAPTER:
Repeats the current chapter.
TRACK:
Repeats the current track.
OFF:
Cancels Repeat Mode.
Time search (hours/minutes/seconds): Enter the time
in the pop-up window using the number buttons then
press ENTER/SET.
• Always enter the hour digit (even “0” hours).
• To correct a mis-entry, press
2
to erase the last
entry.
CHAP.
Chapter search: Enter the chapter number in the
pop-up window using the number buttons then press
ENTER/SET.
• To correct a mis-entry, press the number buttons
until the desired number is shown in the pop-up
window.
1/3
1/3
1/3
Audio language or channel, Subtitle language, View
angle: Select the desired option in the pop-up window
using the cursor buttons then press ENTER/SET.
To clear the on-screen bar,
press ON SCREEN again.
disappears
Control Screen Operations
You can search for and play the desired items through the control screen.
For DVD-VR
Ex.: When Original Program is selected.
Ex.: When Play List is selected.
For MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/ASF/DivX files
Ex: While playing an MP3 file on a disc.
1
Listed number
2
Recording/creating date
3
Recording channels
4
Recording time
5
Title
6
Highlight bar
7
Chapters included
8
Playback time
1
Current source
2
Current group number/total group number
3
Current group
4
Group list
5
File information (only for MP3/WMA/WAV files)
6
Current file
7
Random Play/Program Play setting (for “DVD/CD”)
8
Repeat Play setting
9
Elapsed playing time of the current file
(not applicable for JPEG files)
p
Operation status icon
q
Current file number/ total number of files in the
current group (total number of files)
w
Highlight bar (current selection)
e
File list
Listening to the Radio
Tuning in to a Station
While FM or AM is selected...
2 sec.
Frequency starts changing on the display. When a station
(frequency) with sufficient signal strength is tuned in, the
frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step. To manually stop the search, press
either button.
• The ST indicator lights while an FM stereo station with
sufficient signal strength is tuned in.
If the FM reception is poor
The MONO (monaural) indicator lights on the display.
Reception will improve though stereo effect is lost—
Monaural reception.
To restore the stereo effect,
press the button again. The
MONO (monaural) indicator disappears.
Timer Operations
Setting the Daily Timer
1
Select DAILY (1 – 3) time setting mode (ON).
2
Set the timer as you like.
Repeat the procedure for the following settings until
finished.
1
Set the hour then the minute for on-time.
2
Set the hour then the minute for off-time.
3
Select the playback source—“TUNER AM,” “DISC,”
“USB,” “iPod”, “AUDIO IN” or “TUNER FM.”
4
For “TUNER AM” or “TUNER FM”: Select a preset
channel.
For “DISC”: Select the title/group number, then the
chapter/track/file number*.
For “USB”: Select the group number, then the track/
file number*.
* You can select up to 99 groups and 150 chapters/
tracks/files.
5
Select the volume level (“MIN” to “MAX” and
“– –”).
If you select “– –,” the volume is set to the same level
as when the System was last turned off.
Once settings are completed, the timer setting
information appears in sequence.
3
Turn off the System (on standby), if you have set
the timer with the System turned on.
To cancel the Daily Timer,
select DAILY (1 – 3) you want to
cancel, then press CANCEL (while holding SHIFT).
To turn on the Daily Timer,
select DAILY (1 – 3) you want
to turn on, then press ENTER/SET.
Setting the Clock
Without setting the built-in clock, you cannot use Daily
Timer.
1
While holding SHIFT, press CLOCK/TIMER.
• If you have already adjusted the clock before, press
the button repeatedly until the clock setting mode is
selected (see below).
2
Adjust the hour, then the minute using the cursor
buttons, press ENTER/SET.
• To exit the clock settings, press CLOCK/TIMER (while
holding SHIFT) as required.
• To return to the previous step, press CANCEL (while
holding SHIFT).
(While holding)
Clock setting
Daily Timer
DAILY1
=
ON
(Time)
Canceled
Daily Timer
DAILY2
=
ON
(Time)
Daily Timer
DAILY3
=
ON
(Time)
Presetting the Stations
You can preset 30 FM and 15 AM stations.
1
Tune in to a station you want to preset.
• You can also store the monaural reception mode for
FM preset stations if it has been selected.
2
Press ENTER/SET to activate the preset
number entry mode.
• Finish the following process while the indication on
the display is flashing.
3
Select a preset number for the station you store
using the number buttons.
4
Press ENTER/SET to store the station.
To tune in to a preset station
1
Select the band (FM or AM).
2
Select the preset number using the number
buttons.
To detach the dock adapter from the dock:
Pull up the dock adapter with your fingernail or sharp
pointed tool using the slot.
• Be careful not to injure your fingertips or damage the
terminal of the dock.
About charging the battery of iPod
The unit enables users to charge the battery of iPod.
1
Press
to turn on the power of the unit.
2
Select iPod as the source.
3
Press and hold
7
for 2 seconds to start charging.
• Press and hold
7
to deactivate the battery charging
function.
• When 2 iPod devices are connected, both batteries are
charged at the same time.
• For details of the battery charging, see the instruction
manual for iPod.
Dock A
Dock B
