4
Set up the system following the flow chart shown below. The procedure for setting up the system differs
depending on your usage environment.
NOTE
To connect the main unit to the computer directly, refer to “Connecting the main unit to the computer directly”
on page 21.
General flow chart for the network function
Connect the main unit to the router connected to your computer.
Install CyberLink Media Server to your computer.
Specify the shared folders.
Start CyberLink Media Server, and then make sure that the main unit
recognizes CyberLink Media Server.
Does the main unit recognize
Yes
No
The IP address is assigned
automatically using the DHCP
function of the router.
Check the cable connection.
Does the main unit recognize
Yes
No
The IP address has to be set up
manually.
Find out the IP address of your
computer.
Assign the IP address to the
main unit.
The setup is complete.
Now you can enjoy playback of files stored on the computer!
NX-BD3_network.book Page 4 Friday, August 8, 2008 9:28 AM
