EN
57
SOUND1
0 . 0
ON
OFF
FULL SOUND
48kHz MODE
32kHz MODE
DISPLAY
TIMECODE
SYNCHRO
END
4
SOUND1
0 . 0
ON
OFF
FULL SOUND
48kHz MODE
32kHz MODE
DISPLAY
TIMECODE
SYNCHRO
END
4
ADJUSTMENT OF VCR’S AGAINST
CAMCORDER TIMING
4
ACCESS PLAYBACK MENU
Point the remote control at the camcorder’s remote
sensor and press
R.A. EDIT ON/OFF
to make the
Random Assemble Editing menu disappear, then
press
MENU
. The Playback Menu appears.
5
SELECT FUNCTION
Move the highlight bar to “SYNCHRO” by rotating
the Select Dial, then press it. The value for
“SYNCHRO” is highlighted.
6
INPUT CORRECTION DATA
Based on the diagnostics performed (
Z
pg. 56), you
can now increase the VCR’s speed by rotating the
Select Dial upward. You can also slow down the
VCR’s speed by rotating the Select Dial downward.
The adjustment range is from –1.3 to +1.3 seconds, in
0.1-second increments.
7
CLOSE MENU
Press the Select Dial twice.
•Now perform Random Assemble Editing beginning
with step
3
on page 53.
NOTES:
●
Before performing actual Random Assemble Editing, do
a few Random Assemble Editing trial runs to check
whether the value you have input is appropriate or not,
and make adjustments accordingly.
●
Depending on the recorder, there may be situations
where the timing difference cannot be fully corrected.
Playback Menu
Power Switch
MENU Button
Display
Select Dial
VCR
(Recording deck)
TV
