background image

EN 

43

B/W

1
2

SHUTTER
(Variable Shutter

(

Speed)

1/50–The shutter speed is fixed at 1/50th of a
second. Black bands that usually appear when
shooting a TV screen become narrower.
1/100–The shutter speed is fixed at 1/100th of a
second. The flickering that occurs when shooting
under a fluorescent light or mercury-vapour lamp
is reduced.
1/250, 1/500–These settings allow fast-moving
images to be captured one frame at a time, for
vivid, stable slow-motion playback. The faster the
shutter speed, the darker the picture becomes.
Use the shutter function under good lighting
conditions.

TWILIGHT

Makes evening scenes look more natural.
White Balance (

Z

 pg. 47) is initially set to 

,

but can be changed to your desired setting. Also
when Twilight is chosen, the manual focus
indication appears.

Like classic black and white films, your footage is
shot in B/W. Used together with the Wide Cinema
function, it enhances the “classic film” effect.

Recorded scenes have a brownish tint like old
photos. Combine this with the Cinema mode for
a classic look.

CLASSIC FILM

Gives recorded scenes a strobe effect.

STROBE

Your recording looks like a series of consecutive
snapshots.

SLOW (Slow Shutter)

You can light dark subjects or areas even brighter
than they would be under good natural lighting.

x 4 = 4 times sensitivity
(shutter speed 1/12.5 sec.)

 x 10 = 10 times sensitivity
(shutter speed 1/5 sec.)

SEPIA

MONOTONE

NOTES:

When using Slow, the image takes on a strobe-
like effect.

Use Slow only in dark areas.

The Manual Focus indication may appear and
flash when Slow is in use.

If the image is out of focus, adjust manually. It
is also recommended that you use a tripod, if
possible.

Adds a “ghost” to the subject, giving your
recording a “fantasy” feeling.

VIDEO ECHO

Summary of Contents for LYT0002-0Y3A





















































































Reviews: