JVC LYT0002-0Y3A Instructions Manual Download

Page: 8 / 84

Charging The Battery Pack

You can charge one battery pack at a time, or two consecutively.

GETTING STARTED

ATTACH

DETACH BATTERY/BATTERIES

Slide the battery or batteries in the direction of
the arrow and lift off.

•Remember to unplug the AC Adapter/

Charger’s power cord from an AC outlet.

BATTERY

ONE

TWO

BN-V907U

approx. 100 min.

approx. 200 min.

CHARGING TIME**

To AC outlet

Power cord

DC jack

Charger indicator 2

Power lamp

Charger indicator 1

DETACH

SUPPLY POWER TO CHARGER

Plug the AC Adapter/Charger’s power cord in
to an AC outlet. The power lamp comes on.

ATTACH BATTERY/BATTERIES

Remove the battery pack’s protective cap and
attach while making sure the

marks are

facing down and aligned with the correspond-
ing marks on the AC Power Adapter/Charger.

• The Charger Indicator (1 or 2) begins blinking

to indicate charging has started.

CONFIRM STATUS

When the charger indicator stops blinking but
stays lit, charging is finished.

• If two batteries are attached to the charger,

they will be charged in the order that they
were attached.

Battery pack BN-V907U

AC Power
Adapter/Charger

Summary of Contents for LYT0002-0Y3A




















































































Search results

Summary of Contents for LYT0002-0Y3A

Reviews:

Related manuals for LYT0002-0Y3A

Brands by name

Popular brands

JVC LYT0002-0Y3A, Instructions Manual

Search results

Summary of Contents for LYT0002-0Y3A

Reviews:

Related manuals for LYT0002-0Y3A

Brands by name

Popular brands