background image

Note

When you press INPUT, the Input Selection list 
opens. If you select a CEC-compatible video device 
connected to an HDMI jack and that device is 
connected to a CEC-compatible audio device, a 
second selection list opens that shows both devices.
For example, if you connect a
CEC-compatible Blu-ray player to an HDMI jack and 
the Blu-ray player is connected to a CEC-compatible 
soundbar, the second input
selection list might appear as follows:

See Selecting the video input source.

Turning HDMI-CEC Control on or off

Note

If Enable HDMI CEC Control is set to Off, the other 
options on the menu are grayed and cannot be used.

1.  Press MENU, press S or T to highlight Options, 
then press OK.

2.  Highlight HDMI CEC Control Setup, then press
OK.

3.  Highlight Enable HDMI CEC Control, then press
OK.
4.  Highlight On or Off, then press OK.
5.  Press EXIT to close the menu.

Accessibility

Picture

Sound

Options

timers

Get Help

<  Options

HDMI CEC control Setup

HDMI CEC Player Control

HDMI Model       Advance Mode(2.0)

Auto Input Sensing                 Off

Input labeling

Power Mangement

Parental PIN Setup

Channel Options

Photos

Parental Control and Locks

Installation

Accessibility

Picture

Sound

Options

timers

Get Help

Enable HDMI CEC Control       on

TV Auto Power                           on

Auto Standby                             o ff

Amplifier Control                       on

HDMI CEC control Setup

Installation

On

Off

Turning TV Auto Power on or off

TV Auto Power automatically turns on your TV when 
an HDMI CEC device is turned on, if the device has 
this feature.
1.  Press MENU, press S or T to highlight Options, 
then press OK.

2.  Highlight HDMI CEC Control Setup, then press
OK.
3.  Make sure that Enable HDMI CEC Control is set to
On.

4.  Highlight TV Auto Power, then press OK.
5.  Highlight On or Off, then press OK.
6.  Press EXIT to close the menu.

Turning Auto Standby on or off

Auto Standby automatically turns off HDMI CEC

devices when you turn off your TV.
1.  Press MENU, press S or T to highlight Options, 
then press OK.
2.  Highlight HDMI CEC Control Setup, then press
OK.
3.  Make sure that Enable HDMI CEC Control is set to
On.

Accessibility

Picture

Sound

Options

timers

Get Help

<  Options

HDMI CEC control Setup

HDMI CEC Player Control

HDMI Model       Advance Mode(2.0)

Auto Input Sensing                 Off

Input labeling

Power Mangement

Parental PIN Setup

Channel Options

Photos

Parental Control and Locks

Installation

Accessibility

Picture

Sound

Options

timers

Get Help

Enable HDMI CEC Control       on

TV Auto Power                           on

Auto Standby                             o ff

Amplifier Control                       on

HDMI CEC control Setup

Installation

On

Off

Accessibility

Picture

Sound

Options

timers

Get Help

<  Options

HDMI CEC control Setup

HDMI CEC Player Control

HDMI Model       Advance Mode(2.0)

Auto Input Sensing                 Off

Input labeling

Power Mangement

Parental PIN Setup

Channel Options

Photos

Parental Control and Locks

Installation

OPERATION

-20-

Summary of Contents for LT-65MA 875































Reviews: