PC position adjustment
Switch between video and component signal
Using S-VIDEO
Using OUT terminal
ENGLISH
IMPORT
ANT!
SETTINGS
TROUBLE?
USE
PREP
ARE
11
1
2
3
4
5
6
Video-1
Video-2
Video-3
HDMI1
HDMI2
HDMI3
7
PC
AV Select
0
01
MENU/OK
Operate the connected device and play a video
Select the video source
1
Watching videos / DVDs
2
Operate JVC recorders and other devices (P. 7)
Select the video source using the side buttons
1
Select the
video source
2
3
2
watch
1
select
Display the menu bar and select “Set Up”
1
select
2
next
Select “PC Position”
1
select
2
next
Shown only when “PC” is selected.
PC Position
>
1
adjust
2
set
Reset position
(blue)
Set Up
Set Up
Auto Program
Video-3 Setting
Video
Edit/Manual
Video-1 Setting
Language
Video
HDMI Setting
On
PC Position
Auto Demonstration
Teletext Language
Video
Display the menu bar and select “Set Up”
1
2
1
select
2
next
Select “Video-1 Setting” or “Video-3 Setting”
1
select
3
Change settings
2
set
1
select
Video
: For normal
video signal
Component : For
component
video signal
If both composite and S-VIDEO cables are connected, S-VIDEO will be enable.
Component and PC signals does not output from this terminal.
When you are viewing video signal, no signal will output through the S-VIDEO
terminal.
HDMI-1, HDMI-2 and HDMI-3 inputs does not output from this terminal.
Or
Note : TV/VIDEO button select the video source by move down.
Select the video source by move
down.
or
USE
1
2
MENU/OK
