manualshive.com logo in svg

JVC LT-48C570, Instruction Manual, Page: 36 / 64

Share
Download
JVC LT-48C570 Instruction Manual Download Page 36

36

5

Customising TV Settings

Over Air Download (DTV Mode)

The TV auto detects the latest firmware through the DTV signal and allows you to accept or refuse the firmware upgrade service. 
This function may not be available in some countries. Please follow the steps below if applicable.

1.  Press the MENU button to display the main menu. Press the   

   

buttons to select the CHANNEL menu and then press the OK button.

2.  Press the 

 buttons to select OAD and then press the OK button to 

switch On / Off.

3.  Press the MENU button to return to the main menu.

4.  Press the EXIT button to exit the menu.

5.  During normal DTV viewing, if the TV detects the latest firmware from 

the DTV signal, the Over Air Download screen will appear. Press the     
buttons to select Yes / No for the upgrade procedure.

6.  If you select Yes, the over air download will start. Press the EXIT button if 

you want to stop the download and exit the menu.

7.  When the download is complete, the TV will return to standby mode. 

Press the   button on the left bottom panel under the TV frame or on 
the remote control to switch on the TV, the TV will automatically upgrade 
the software.

PICTURE

SOUND

SOURCES

TIME

LOCK

SETTINGS

SYSTEM

CHANNEL

CHANNEL

Recorded List

Schedule List

Exit

EXIT

Select

Adjust

Move

OK

OAD

During download, please do not turn off or unplug your TV.

8.  When the update is complete, the TV will return to standby mode.

9.  Press the   button on the left bottom panel under the TV frame or on 

the remote control to switch on the TV.

If you encounter problems after the software update, we recommend that you restore your TV to the factory default 
settings. To do this, follow the steps below:
•  Press the MENU button to go to the main menu. Press the 

 buttons to select SYSTEM and then press the OK button.

•  Press the 

 buttons to select Reset TV and then press the OK button. Press the   button to select Yes to reset the 

setting.

•  The TV settings will be restored to factory default and will be switched off. Follow the First Time Installation steps (refer 

to page 23 for details) after you switch on the TV again.

Select Sources

Selects the input source that you want.

1.  Press the MENU button to display the main menu. Press the   

   

buttons to select the SOURCES menu and then press the OK button.

PICTURE

SOUND

CHANNEL

TIME

LOCK

SETTINGS

SYSTEM

SOURCES

Summary of Contents for LT-48C570

































































Reviews:

No comments