JVC LT-32WX84 Service Manual Download Page 11

Page: 11 / 130

(No.YA004)1-11

SECTION 3

DISASSEMBLY

3.1

DISASSEMBLY PROCEDURE

NOTE:

Since this model adopts a layer structure, follow the procedure below in disassembling this model.
Be careful enough not to damage or scratch parts.

3.1.1 REMOVING THE STAND

(1) Remove the 2 screws [A], and remove the STAND

COVER.

(2) Remove the 4 screws [B], and remove the STAND.

3.1.2 REMOVING THE REAR COVER

• Remove the STAND.

(1) Remove the JACK COVER (L/R).
(2) Remove the 7 screws [C], 3 screws [D], and 2 screws [E]

(12 screws in total).

(3) Remove the REAR COVER.

3.1.3 REMOVING THE REGULATOR PWB / COOLING FAN

• Remove the STAND.
• Remove the REAR COVER.

(1) Pull out the wire of COOLING FAN.
(2) Remove the 5 screws [F], and remove the FAN BRACKET.
(3) Remove the 2 screws [Y], and remove the COOLING FAN.
(4) Remove the REGULATOR PWB.

3.1.4 REMOVING THE RECEIVER PWB

• Remove the STAND.
• Remove the REAR COVER.
• Remove the FAN BRACKET.

(1) Remove the 2 screws [G] and 3 screws [H] (5 screws in

total). Then, remove the TERMINAL BASE.

(2) Remove the 6 screws [J], and remove the RECEIVER

PWB.

3.1.5 REMOVING THE FRONT CONTROL PWB CONTROL /

FRONT SENSOR PWB

• Remove the STAND.
• Remove the REAR COVER.

(1) Remove the 2 screws [K], and remove the CONTROL

KNOB.

(2) Remove the 2 screws [L], and remove the FRONT

CONTROL PWB.

(3) Remove the FRONT SENSOR PWB.

3.1.6 REMOVING THE VIDEO PWB / MI-COM & DIST

MODULE PWB

• Remove the STAND.
• Remove the REAR COVER.
• Remove the FAN BRACKET.

(1) Remove the 3 screws [M] and remove the JACK BASE.
(2) Remove the 5 screws [N] and remove the VIDEO PWB

SHIELD.

(3) Remove the 2 screws [P], and remove the VIDEO PWB.
(4) Remove the 5 screws [R], and remove the VIDEO PWB

BRACKET.

(5) Remove the 4 screws [S], and remove the MI-COM & DIST

MODULE PWB form the VIDEO PWB BRACKET.

3.1.7 REMOVING THE POWER PWB

• Remove the STAND.
• Remove the REAR COVER.
• Remove the FAN BRACKET.
• Remove the RECEIVER PWB.

(1) Remove the 4 screws [T], and remove the RECEIVER

PWB BRACKET.

(2) Remove the 1 screw [U], and remove the POWER CORD

HOLDER.

(3) Remove the 5 screws [V], and 1 screw [W] . Then, remove

the POWER PWB.

(4) Remove the 4 screws [X], and remove the CHASSIS

BASE.

3.1.8 REMOVING THE DIGITAL INPUT MODULE PWB

• Remove the STAND.
• Remove the REAR COVER.

(1) Remove the 2 screws [Q], and remove the DIGITAL INPUT

MODULE BASE.

(2) Remove the 2 screws [Z], and remove the DIGITAL INPUT

MODULE PWB.

CAUTION AT DISASSEMBLY

• Prior to disassembly, unplug the power code from the AC

outlet without fail. (Turn the power "off".)

• Short the SB connector [1] pin and [2] pin of the DIGITAL

INPUT MODULE. (At the time of assembling)

• Before the rear panel is inserted into the cabinet, release

the short-circuit between the SB connector [1] pin and [2]
pin of the DIGITAL INPUT MODULE.

• After releasing the short-circuit between the SB

connectors, do not turn the power on until the rear panel
is inserted into the cabinet.

• Negligence in carrying out the above steps may cause the

inactivation of the TV.

DIGITAL INPUT

MODULE BASE

DIGITAL INPUT MODULE

SB
connector

Summary of Contents for LT-32WX84



































































































































Search results

Summary of Contents for LT-32WX84

Reviews:

JVC LT-32WX84, Service Manual, Page: 11 / 130

Search results

Summary of Contents for LT-32WX84

Reviews: