61
What is “T-V LINK”?
“T-V LINK” allows the TV to share information easily with a connected “T-V LINK” compatible device.
By using T-V LINK:
z
You can send the channel information programmed on the TV to the “T-V LINK” compatible device, so that both
the TV and the external device have the same channel settings. When connecting a new external device,
channel information is loaded into it, allowing channel setup to be completed very quickly. For more details,
refer to the external device’s manual.
z
You can easily record the TV programme you are viewing on a “T-V LINK” compatible device by using the
“Direct Rec” feature. For more details, refer to the external device’s manual.
What is “ACI” (Automatic Channel Installation)?
Some cable companies transmit a signal called “ACI” which contains information that allows TV channels to be
registered automatically on your TV.
When an ACI signal is received, “ACI Start / ACI Skip” appears in the “Auto Program” screen.
Receivable broadcast systems (Analogue channels)
Depending on the country selected during “Auto Program”, the receivable broadcast system differs.
z
UNITED KINGDOM: Receive only PAL-I.
z
FRANCE: Can receive SECAM-L.
To receive SECAM-L in countries other than France:
1) Change the “Country” to “France” in “Auto Program”. (P. 45)
2) Press the “BACK” button to return to the menu and enter the channel using “Insert” or “Manual”. (P. 16)
PC signals that can be displayed
z
If the signal doesn’t appear, check that the
vertical frequency on the PC is set to “60Hz”.
Resolution
640 x 480 (VGA) 1024 x 768 (XGA)
Vertical frequency (Hz)
60.0
60.0
Connect DVI devices
Connect a DVI device to EXT-5 (HDMI) using DVI-HDMI conversion cable. Connect analogue sound output of the
DVI device to L and R terminals in EXT-4.
z
Set “Audio” in “HDMI Setting” to “Analogue” or “Auto”
g
(P. 46)
z
EXT-6 input does not support analogue sound (EXT-4).
Power supply for the indoor aerial
When using an indoor aerial which requires external power, set “Antenna Power” to “On”. The TV will supply DC
5V, 50mA (max) from the aerial socket through the cable to the aerial.
z
Supplying power to outdoor and indoor aerials which does not require external power, may cause damage to
the aerial. If you are uncertain whether the aerial needs external power, select “Off”.
z
Connect the aerial directly to the TV. When a recording device is connected between the aerial and the TV,
power cannot be supplied to the aerial.
z
Power is supplied to the aerial only when the TV is on.
z
To change the setting after “Initial settings” is complete
g
“Antenna Power” (P. 54)
Digital channels that cannot be watched on this TV
If a digital channel service uses new formats (such as DVB-H or MPEG4, etc.), or MHP, it cannot be watched even
though the channel name appears.
If the channel is selected, the picture will not appear and audio cannot be heard.
z
You can delete these channels by using the “Delete” in the “Edit PR”
g
“Editing digital channels” (P. 15)
Technical Information
LT-42DP8BG.book Page 61 Wednesday, June 6, 2007 7:25 PM
Summary of Contents for LT-32DP8BG
Page 2: ......
Page 72: ...0607KTH SW MU 2007 Victor Company of Japan Limited ...
