JVC LT-32DP8BG, Instruction Manual

Page: 19 / 123

14
IMPORTANT
PREPARE
USE
SETTING
TR
OUBLE?
EN
GL
IS
H
If you still cannot watch digital channels after following the steps above, there may be a problem
with your aerial or its cable. Or, the signal may be too weak.
g
Consult your retailer
The “Missing or weak signal” message appears.
Check digital channels signal
g
“Signal Check” (P. 56)
If you still cannot watch digital channels after following the steps above, there may be a problem
with your aerial or its cable. Or, the signal may be too weak.
g
Consult your retailer
When the TV cannot find the digital channels
When the digital channel reception is poor
Check the following points
z Is the TV connected correctly to the aerial?
z Change the direction of the indoor aerial.
z Is there a digital channels transmission tower nearby?
g
Turn “Attenuator” to “On” (P. 46), since the radio waves are too strong.
z “Attenuator” attenuates the radio waves of analogue broadcast as well as those of digital broadcast. If
some noise or snow appears when watching an analogue channel, please set “Attenuator” to “Off”
temporarily.
Note
z Register digital channels again
g
“Service Scan” (P. 55)
Check the following points
z Is the TV connected correctly to the aerial?
z Change the direction of the indoor aerial.
z Is there a digital channels transmission tower nearby?
g
Turn “Attenuator” to “On” (P. 46), since the radio waves are too strong.
z “Attenuator” attenuates the radio waves of analogue broadcast as well as those of digital broadcast. If
some noise or snow appears when watching an analogue channel, please set “Attenuator” to “Off”
temporarily.
Note
LT-42DP8BG.book Page 14 Wednesday, June 6, 2007 7:25 PM