English
- 34 -
Via The Scart
This LCD TV has 2
SCART
sockets. If you want
to connect peripherals (e.g. video, decoder,
etc.) which have
SCART
sockets to the TV, use
EXT 1
or
EXT 2
.
If an external device is connected via the
SCART
sockets, the TV will be switched to AV mode
automatically.
Via Aerial Input
If you want to connect to your TV, peripherals
like video recorders or decoders, but the de-
vice you want to connect does not have a
SCART
socket, you should connect it to the
AERIAL INPUT
of the TV.
If the VCR is connected via Aerial input it is
suggested to use Programme 0.
Decoder
Cable TV offers you a wide choice of prog-
rammes. Most of them are free, others are to
be paid for by the viewer. This means that you
will need to subscribe to the broadcasting
organisation whose programmes you wish
to receive. This organisation will supply you a
corresponding decoder unit to allow the prog-
rammes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
Connect the decoder to the TV with a
SCART
cable to the
SCART
socket.
TV and Video Recorder
Connect the aerial cables.
Better picture quality can be obtained if you also
connect a Scart cable to
SCART
sockets.
Playback NTSC
To use this option you can;
Connect an NTSC VCR player to a
SCART
socket at the rear side of the TV.
Connect an NTSC VCR player to RCA Jacks
at the side of the TV.
Then, press
AV
button to select appropriate
source.
Copy Facility
Source selection for
VCR
recording.
Select
Feature
menu.
Select
Ext-2 Out
by pressing / but-
ton.
Select a source to copy the picture from that
source.
Search for and Store the Test
Signal of the Video Recorder
Unplug the aerial cable from the aerial socket
of your video recorder.
Switch on your TV and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
Enter the
Install
menu and select
search
.
Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. Store the test sig-
nal under programme number 0.
Replace the aerial cable in the aerial socket
of your video recorder once you have stored
the test signal.
Camera and Camcorder
To Connect to AV Input
Connect your camera or camcorder to AV
(EXT-4) input at the right side of the TV.
Connect your equipment to the TV via
VIDEO
(yellow),
AUDIO R
(red) and
AUDIO L
(white)
inputs. You must connect the jacks to the
input using the same colour.
Connect the Decoder to the Video
Recorder
Some video recorders have a special
SCART
socket for decoder.
Connect a
SCART
cable to the
SCART
socket
of your decoder and to the special
SCART
socket of your video recorder. Refer to the
booklet of your video recorder.
A01-ENG-JVC (LT-26DY8ZG)-26815W-RMC1899S MB22 PANEU IDTV-(WO PIP)-(10052179)-5011xxxx.p65
11.09.2007, 13:50
34
