English
- 20 -
3. Use the / buttons, number but-
tons and OK button to set the timer.
When setting the start time and end time,
input 1200 for 12:00 PM, 1500 for 3:00 PM
and 0000 for 12:00 AM.
Name:
Use the / buttons to choose the chan-
nel for which the timer is to be set.
Press the button.
Start:
Set the timer start time with the number but-
tons.
When the / buttons are pressed, the
input position moves.
Press the button.
End:
Set the timer end time with the number but-
tons.
When the / buttons are pressed, the
input position moves.
Press the button.
Date:
Set the date for the timer to work with the num-
bers.
When the / buttons are pressed, the
input position moves.
Press the button.
Mode:
Use the / buttons to choose the timer
mode (Once/Daily/Weekly), and then press the
OK
button.
4. Prepare your VCR for recording
When recording on a T-V LINK
compatible VCR:
1. Insert the videotape for recording into the
VCR and set the recording mode.
2. Make sure the VCR is ready to receive Di-
rect Rec commands from the TV.
3. Make sure VCR timer settings do not coin-
cide with the TV timer settings.
For details, see your VCR instruction manual.
When recording on a T-V LINK
incompatible VCR:
1. Insert the videotape for recording into the
VCR and set the recording mode.
2. Set the VCR recording timer settings.
3. Make sure that the start and end time match
with the TV timer.
4. Set the VCR to record the signal from the
external input that the TV is connected to.
For details, see your VCR instruction manual.
When you have finished the step 4, you have
set the timer.
When you are not watching TV, make sure the
TV is in standby.
WARNING :
Do not turn off the main power. The timer func-
tion will not work with the main power switched
off.
The TV power lamp begins flashing before
the timer start time. When you are watching
TV at that time, a message appears on the
screen to inform you the timer is about to start.
When performing timer recording with a T-V
LINK compatible device, test the timer re-
cording before you record the programme.
There are some T-V LINK compatible record-
ing device that will not correctly receive the
Direct Rec command from the TV.
If the recording device does not operate when
the recording start time is reached, it means
VCR is not receiving the Direct Rec com-
mand from the TV. In this case, follow the
instructions of When recording on a T-V LINK
incompatible VCR:.
While the timer is in operation:
You can turn the TV on or off (Standby).
WARNING: Do not turn off the main power.
You can watch the pictures via an Ext termi-
nal.
Please note that any programme informa-
tion that appears on the screen, such as when
making changes to the
DTV
channel pic-
ture, will be superimposed over the picture
A01-ENG-JVC (LT-26DY8ZG)-26815W-RMC1899S MB22 PANEU IDTV-(WO PIP)-(10052179)-5011xxxx.p65
11.09.2007, 13:50
20
