11
12
ENGLISH
First Time Installation > Language Setting
Step 1: Please choose language
Language
English
Deutsch
First Time Installation > Country Setting
Step 2: Please choose country
Country
Germany
First Time Installation > Service Scan
Step 3: Please press OK
Scan
Automatic
Start Channel
_ _
Stop Channel
_ _
Mode
Add
Start Scan
Service
First Time Installation > Service Scan
Step 3: Please press OK
Scan
Automatic
Start Channel
_ _
Stop Channel
_ _
Mode
Add
Start Scan
Service
Doku/KiKa
VHF33 : 3 Services found
ZDF
Info/3sat
Stop Channel
_ _
Mode
Add
Start Scan
Teema
Teema
Teema
Yes
No
Scan completed! Store services?
No services found!
OK
Start Channel
_ _
Stop Channel
_ _
Mode
Add
Start Scan
On
Off
Antenna Power
IMPORT
ANT!
PREP
ARE
USE
SETTINGS
TROUBLE?
Initial settings
Register digital / analogue channels on TV. These channels can be edited later.
(In this manual, digital terrestrial broadcasting is indicated as digital channels,
analogue terrestrial broadcasting and analogue cable TV as analogue channels.)
Begin
To the previous screen
Exit
BACK
TV/DTV
If the “JVC” logo does not appear or if you
wish to make changes later
Digital channel settings : “Configurations” (P. 41)
“Installation” (P. 45)
Analogue channel settings : “Set Up” (P. 36)
The remote control
doesn’t work
Confirm the mode is set to
“TV”.
Shown only when powering on for the first time.
The power button on the unit can also be used.
2
1
Set digital channels
Select a language
1
select
2
set
Confirm “Germany” is set
Scan digital channels
Register digital channels
1
2
4
5
What is “T-V LINK”?
Connecting the TV to a “T-V LINK”
compatible device allows :
Analogue channels to be instantly
registered on the device.
The “DIRECT REC” function to be
used.
“Technical information”
(P. 56)
“T-V LINK” variations
“T-V LINK” (JVC) “Q-LINK” (Panasonic)
“Megalogic” (Grundig) “Data Logic” (Metz)
“SMARTLINK” (Sony) “Easy Link” (Philips)
This TV can only receive
German digital channels.
If digital channels are not found, the following message will appear.
After completing following steps, read “When the TV cannot find the digital
channels” (P. 14) and try scanning digital channels again
Language for on-screen
displays when watching digital
channel including the DTV
menu.
2
next
1
select
!
(Next page)
3
Set the aerial power supply
If you are uncertain whether the aerial
needs external power, select “Off”.
Only when using an aerial which
needs external power, select “On”.
“Power supply for the indoor
aerial” (P. 56)
11-12
6/5/2006 2:20:01 PM