19
EN
Other convenience functions
Selected Items
Setup hint
Setup
OSD Language
See page 12.
Aspect Ratio
See page 21.
Blue Screen
You can set the TV to automatically change to a blue
screen and mute the sound if the signal is weak or
absent.
On / Off
Time Setup
Time Zone
If the time displayed on the Channel Information differs
from the actual time, adjust the time offset until the
correct time zone is shown.
Normally, this would be done by selecting “As
Broadcaster”.
•
Time
See page 13.
Sleep Timer
Sleep timer switches the TV to standby after a defined
period of time.
To cancel the Sleep Timer, set to “Off”.
Off / 10 / 20 / 30 / 40
/ 50 / 60 / 90 / 120
Minutes
Auto Sleep
When the Set and Remote button operation are not
operated with specified period by this setting (3/4/5
Hours), the power status is changed to stand by mode
automatically
Off / 3 / 4 / 5 Hours
OSD Timer
The OSD is cleared automatically as per this setting.
None / 5 / 10 / 15 / 30 /
45 /60 S
Subtitle
Subtitle
On /Off
Select subtitle On or Off.
Digital Subtitle Lang. 1st
Select preferred subtitle language, if the current
watching DVB channel has more than one subtitle
language.
Digital Subtitle Lang. 2nd
Select second preferred subtitle language.
Subtitle Type
Select the subtitle type (Normal / Hearing Impaired).
Teletext
Digital Teletext Language
First preferred Videotext language can be set here,
which is used in case that the currently viewed DVB
channel has more than one Videotext Languages.
If the channel does not have the Videotext language set
in “Digital Teletext Language”, the Videotext language is
displayed with first receiving language.
Decoding Page Language
Set language for the decoding page.
Audio Language
Audio Language 1st
Select preferred audio language, if the current watching
DVB channel has more than one audio language.
Audio Language 2nd
Select second preferred audio language, if the current
watching DVB channel does not have the language
set in “Audio Language 1st” option above. If the “Audio
Language 2nd” set here is not transmitted in the
channel, the first language included in the channel is
selected.
Common Interface
You can access the Common Interface module
information from this menu option.
This unit supports the C.I. card of “Top Up TV” and
“Boxer”
•
Disk Setup
See page 22.
Format Disk
You can format the USB devices.
First Time Installation
See page 11.
Reset Default
Press
▶
or
ENTER
to enter the Reset Default screen.
Press
◀
to select “OK”, then press
ENTER
. Reset the
TV function will now begin.
Lock
See page 17.
J3NW2151A_EN.indd 19
J3NW2151A_EN.indd 19
3/4/13 2:51:42 PM
3/4/13 2:51:42 PM
