JVC LT-24E45B Instruction Manual Download Page 50 | Manualshive

Page: 50 / 64

background image

50

GB

3. Press the buttons to select your storage device and then press the

OK button.

Viewing Photos

1. Press the button at the front right side under the frame or the INPUT

button on the remote control then press the

buttons to select the

USB mode and then press the OK button.

2. Press the buttons to select PHOTO and then press the OK button.

Connecting a USB Storage Device

1. Switch off the TV before connecting any USB

storage device.

2. Connect your USB storage device to the USB port

of your TV.

3. Plug the connected devices into the mains socket

before switching on the POWER ON/OFF switch
which is located at the front right side under the
frame.

4. Press the button at the front right side under

the frame or on the remote control to turn on
your TV and your USB storage device.

5. Press the button at the front right side under

the frame or the INPUT button on the remote
control to display the Source List. Use the

buttons to select USB and then press the OK
button to confirm.

Rear Right Side View of TV

USB

5V

500mA

HDMI2(ARC)

HDMI1

RF

COMMON INTERFACE (CI)

HEADPHONE

YPbPr

USB Cable

(not included)

Adapter

Portable

hard Disk

USB Hub

USB

• If a hard disk is used, make sure its mains adapter is connected to the mains supply.
• If a USB hub is used, make sure its mains adapter is connected to the mains supply as the total current consumption may

exceed 500mA.

•  The maximum supported storage space of the hard disk is 2 TB.
•  The file system only supports FAT32 format.
•  If you want to store the video streaming of a DTV programme, the transfer rate of the USB storage device must not be less

than 5MB/s, otherwise the picture and sound of the programme will be affected and a warning statement will be shown
on the screen. If this happens, please upgrade your USB storage device.

• The TV screen will be blank temporarily as it will take time to start up and stabilise the connected hard disk. This is normal

and the starting time may vary depending on the brand and the memory size of the connected hard disk.

• Disconnect the USB storage device if it is not in use.
• Supports USB2.0 only.

7 Entertainment

Chapter

7

«
...
48
49
50
51
52
...
»

Summary of Contents for LT-24E45B

































































Reviews:

No comments

Related manuals for LT-24E45B

Brand: Hyundai Pages: 29

Brand: Luxor Pages: 76

Brand: Salora Pages: 18

Brand: Transonic Pages: 17

Brand: IVIEW Pages: 11

Brand: Magnavox Pages: 8

Brand: Vizio Pages: 70

Brand: Akai Pages: 111

Brand: Cello Pages: 14

Brand: Quasar Pages: 45

N4790P - 47" LCD TV

Brand: ViewSonic Pages: 2

Brand: SunBriteTV Pages: 36

Brand: Haier Pages: 28

Brand: Haier Pages: 57

Brand: Haier Pages: 50

Brand: Haier Pages: 16

Brand: Haier Pages: 54

Brand: Haier Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands