JVC LT-20B70BE, Instructions Manual

Page: 34 / 38

Additional preparation
31
„ Equipment which can output the
composite signal such as a VCR
Connect the equipment to the EXT-1, EXT-2
or EXT-3
terminal.
„
Equipment which can output the
S-VIDEO signal (Y/C signal) such
as an S-VHS VCR
Connect the equipment to the EXT-2 or
EXT-3
terminal.
„ Connecting headphones
Connect the headphones with a stereo mini-
jack (3.5 mm diameter) to the headphone
socket at the TV rear panel.
• No sound comes from the TV speakers
when the headphones are connected.
„ TV output from the EXT-1 terminal
The video/sound signal of a TV channel you
are viewing is always output from the EXT-1
terminal.
• Changing over a Programme number (Pr.)
also changes over the TV output from the
EXT-1 terminal.
• Teletext programmes cannot be output.
„ TV and video output from the EXT-
2 terminal
The video/sound signal of a TV channel is
output from the EXT-2 terminal when
viewing the TV and EXT3-S inputs.
When viewing composite video input from
the EXT-1 or EXT-3
terminal, the
video/sound signal is also output from the
EXT-2 terminal.
„ Connecting speakers/amplifier
While referring to the audio equipment
connection diagram, connect the audio
equipment you want to the TV.
You can use external front speakers to listen
to the TV sound instead of the TV speakers.
Before connecting anything:
• Read the manuals provided with the
amplifier and speakers.
• Turn the TV and amplifier off.
• Note that connecting cables are not
supplied.
• The output from the AUDIO OUT
terminal is not interrupted by headphone
connection to the TV. You cannot cut the
sound from the front speaker even if you
connect a headphone to the TV.
• Adjust the volume of the external
speakers with the amplifier.
L R
1 Amplifier
2 External speakers (Magnetic-shielded type)