background image

7

ENGLISH

1

  Press MENU button.

2

  Press     buttons to select an item, 

then press     buttons to make 
adjustments.

Ex.: When “COLOR SYSTEM” is selected

3

  Press MENU button to finish the 

menu operation.

Selected item

Operation guide

Main Menu Operations

1

  Press   button while pressing 

MENU button.

2

  Press     buttons to select an item, 

then press  .

•  For some items, adjustments will be 

made by pressing    .

Ex.: When “REMOTE SETTING” is selected

3

  Press     buttons to select an item, 

then 

press   

buttons 

to 

make 

adjustments.

4

  Press MENU button to return to the 

previous menu.

•  Pressing the button again finishes the 

menu operation.

Setup Menu Operations

Selected item

Operation guide

You can reset the following picture 
adjustments you have made for each Picture 
Mode.
•  Adjustments by the buttons on the front 

panel

•  “SHARPNESS,” “CTI.,” and “LTI.” in the 

MAIN MENU (

 page 10)

1

  Press PICTURE MODE button 

repeatedly to select the mode you 
want to reset.

2

  Press and hold PICTURE MODE 

button.

The confirmation message appears.

Selected Picture Mode

3

  Press PICTURE MODE button.

Resetting the Picture Mode 

LMH191&171EA_EN.indd   7

LMH191&171EA_EN.indd   7

08.7.8   5:40:21 PM

08.7.8   5:40:21 PM

Summary of Contents for LM-H171



















Reviews: