11
EXTERNAL DEVICES
Listening to the USB device
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player *, portable HDD, etc. to
the unit.
*
You can connect both MTP (Media Transfer Protocol) devices and USB mass storage class devices.
Attaching a USB memory
This unit can play MP3/WMA/WMA-DRM10
*
/WAV tracks stored in a USB device.
*
See page 30.
Cautions:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device
repeatedly while “CHECK” is flashing on the
display.
• Do not start the car engine if a USB device is
connected.
• Stop play back before disconnecting a USB device.
• This unit may not be able to play the files
depending on the type of USB device.
• You cannot connect a computer to the USB input
terminal of the unit.
• Make sure all important data has been backed up
to avoid losing the data.
• Do not leave a USB device in the car, expose to
direct sunlight, or high temperature to avoid
deformation or cause damages to the device.
If a USB device has been attached...
Playback starts from where it has
been stopped previously.
• If a different USB device is
currently attached, playback
starts from the beginning.
To stop play and detach the USB device
Straightly pull it out from the unit.
• Press SOURCE to listen to another playback source.
You can operate the USB device in the same way you
operate the files on a disc. (See pages 9 and 10.)
• You can listen to WAV files by following the MP3/
WMA files operations listed on pages 9 and 10.
USB input terminal
USB memory
EN08-13_KW-XG704[UI]f.indd 11
EN08-13_KW-XG704[UI]f.indd 11
4/13/07 12:56:19 PM
4/13/07 12:56:19 PM
