JVC KW-XC55 Service Manual Download Page 27

Page: 27 / 59

(No.49784)1-27

SECTION 5

TROUBLESHOOTING

5.1

Service mode

1.Service mode setting operation

2.Service mode menu

Power off condition, then press button,

button and button together more

than 2sec.

Service mode menu can select the next item
by press button.

After RESET, first operation is start from EEPROM
crear(CD disc title & PSM data), and then continue
from the last operation mode.

Press button, button and button together more than 2sec.

EpromClear

CD_RUNNING

IOP_READ_

C1_C2_ERR_

CD_DARTA_RD

CD_ERR_CR_

CD_ERR_RD_

CH_ERR_CR_

CH_ERR_RD_

_VERSION_

: Error history crear when connect CD changer

: CD running mode

: Call the pickup laser level

(Pickup laser level indicate when press SEL key. Only CD mode)

: Call the CD C1,C2 error

: Call the CD LSI data (Only CD mode)

: Crear the CD error history

: Call the CD error history

: Crear the CD changer error history (Only connectd the CD changer)

: Call the CD changer error history (Only connected the CD changer)

: Call microcomputer version of Main, Cassette, and CD changer

: UP key input

: DOWN key input

Decide by SELECT key

Station select UP button and DOWN button can select the mode, it have to press one by one.
Selected menu will done by SEL button to on(press SEL button).

Service mode will release by next condition.
1.Press defferent key.
2.No key input more than 15sec.
3.Pressed remote controller key.
4.ACC to OFF.

www. xiaoyu163. com

QQ 376315150

TEL 13942296513

TEL 13942296513 QQ 376315150 892498299

http://www.xiaoyu163.com

Summary of Contents for KW-XC55




























































Search results

Summary of Contents for KW-XC55

Reviews:

Related manuals for KW-XC55

Brands by name

Popular brands

JVC KW-XC55, Service Manual

Search results

Summary of Contents for KW-XC55

Reviews:

Related manuals for KW-XC55

Brands by name

Popular brands