ENGLISH
31
To change the display information while
tuning into an ensemble
Normally service name is shown on the display.
If you want to check the ensemble name or its
frequency, press DISP.
Each time you press the button, the following
information appears for a while on the display.
To tune in a particular ensemble without
searching:
1
Press SOURCE (BAND) to select DAB tuner as
the source.
2
Press and hold
¢
or
4
for more than
1 second.
3
Press
¢
or
4
repeatedly until the
ensemble you want is reached.
• If you hold down the button, the frequency
keeps changing until you release the button.
Storing DAB services in
memory
You can preset up to 6 DAB services in each DAB
band (DAB1, DAB2 and DAB3) manually.
1
Select the DAB tuner (DAB1–3).
1
Press SOURCE (BAND) to
select DAB tuner as the
source.
2
If necessary, press and
hold SOURCE (BAND)
repeatedly to select the
DAB band number
(DAB1, DAB2 or DAB3.)
Each time you press and hold the button, the
DAB band changes as follows:
2
Tune into an ensemble you want.
3
Select a service of the ensemble you
want.
1
Press MODE ATT.
“MODE” appears on the display.
2
Press
¢
or
4
to
select a service you want, while
“MODE” is still on the display.
CONTINUED ON THE NEXT PAGE
DAB1
DAB2
DAB3
Ensemble name
Service name
Channel number
Frequency
EN29-33.KS-LX200R[E]f
8/30/00, 10:10 AM
31
Summary of Contents for KS-LX200R
Page 40: ...KS LX200R 3 2 MEMO ...
