JVC KS-FX811 Instructions Manual Download

Page: 7 / 25

ENGLISH

Listening to the radio

You can use either automatic searching or manual
searching to tune in to a particular station.

Searching a station automatically:
Auto search

Select the band (FM1 – 3, AM).

Note:

This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.

Start searching a station.

While searching stations, “SEEK” appears
on the display.
When a station is received, searching stops.

Selected band appears.

To stop searching before a station is received,
press the same button you have pressed for
searching.

Searching a station manually:
Manual search

Select the band (FM1 – 3, AM).

Note:

This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.

Press and hold

until

“MANU (manual)” starts flashing on
the display.

RADIO OPERATIONS

TAPE

Multi
Music
Scan

FM1

FM2

FM3

(F1)

(F2)

(F3)

Selected band appears.

CONTINUED ON THE NEXT PAGE

FM1

FM2

FM3

(F1)

(F2)

(F3)

Press

to search

stations of lower
frequencies.

Press

to search

stations of higher
frequencies.

EN07-09KS-FX911_811[U]5.pm5

2/8/02, 12:27 PM

Summary of Contents for KS-FX811


























Search results

Summary of Contents for KS-FX811

Reviews:

Related manuals for KS-FX811

Brands by name

Popular brands

JVC KS-FX811, Instructions Manual

Search results

Summary of Contents for KS-FX811

Reviews:

Related manuals for KS-FX811

Brands by name

Popular brands